The Tektronix passive voltage oscilloscope probe is for use on BNC oscilloscopes with 1Mohm/13pF input. It has an attenuation of 10X with 10Mohm input resistance. Supplied with: Retractable hook tip Ground spring, ground lead with alligator clip Note: All the products in this range are supplied for use with instruments with a permanent earth connection.
Features and Benefits
Bandwidth is DC to 200MHz Attenuation ratio is 1:10 Input impedance is 10Mohmll12pF Cable length is 1.3m Maximum common-mode input voltage is 300KV Maximum Input voltage is 300 VRMS CAT II Wide compensation range is (8pF-18pF)
Applications
Relative low frequency measurements Low frequency computer and telecom measurements Power supplies Low frequency amplifiers
The Tektronix passive voltage oscilloscope probe is for use on BNC oscilloscopes with 1Mohm/13pF input. It has an attenuation of 10X with 10Mohm input resistance. Supplied with: Retractable hook tip Ground spring, ground lead with alligator clip Note: All the products in this range are supplied for use with instruments with a permanent earth connection.
Features and Benefits
Bandwidth is DC to 200MHz Attenuation ratio is 1:10 Input impedance is 10Mohmll12pF Cable length is 1.3m Maximum common-mode input voltage is 300KV Maximum Input voltage is 300 VRMS CAT II Wide compensation range is (8pF-18pF)
Applications
Relative low frequency measurements Low frequency computer and telecom measurements Power supplies Low frequency amplifiers