Wire Rope Clamps

Wire rope clamps, also known as wire rope clips or wire rope grips, are used to clamp a length of wire rope to form a loop. The fitting consists of a u-bolt and a saddle secured by two nuts.

How to use wire rope clamps?

A loose end of wire rope is looped back to form a loop then the wire rope clamp is clamped on and the nuts are tightened to secure the end, usually two to three clamps are used. A common phrase to remember the proper usage of wire rope clips is ""Never saddle a dead horse."" This refers to the saddle or u-bolt must always be placed on the load-bearing side of the wire rope. This protects the rope against crushing.

Material and sizes

Available in steel and stainless steel and in a wide range of sizes to suit different mm width ropes.


...
Read more Read less

Filters

Viewing 1 - 13 of 13 products
Results per page
Description Price Specification Wire Rope Diameter Material
RS Stock No. 491-5388
BrandRS PRO
€6.33
1 Bag of 6
Bag(s)
DIN 1142 3mm Steel
RS Stock No. 183-5891
BrandRS PRO
€5.51
Each
units
DIN 741 3mm Stainless Steel
RS Stock No. 247-9076
BrandRS PRO
€6.33
Each
units
DIN 741 6mm Stainless Steel
RS Stock No. 124-4798
BrandRS PRO
€13.50
Each
units
AISI 304 (U-Bolt), AISI 316 (Base) 8mm Stainless Steel
RS Stock No. 183-5908
BrandRS PRO
€6.20
Each
units
DIN 741 5mm Stainless Steel
RS Stock No. 124-4799
BrandRS PRO
€18.88
Each
units
AISI 304 (U-Bolt), AISI 316 (Base) 10mm Stainless Steel
RS Stock No. 197-0152
BrandRS PRO
€11.72
1 Bag of 6
Bag(s)
DIN 1142 8mm Steel
RS Stock No. 197-0146
BrandRS PRO
€12.31
1 Bag of 6
Bag(s)
DIN 1142 6.5mm Steel
RS Stock No. 197-0130
BrandRS PRO
€7.92
1 Bag of 6
Bag(s)
DIN 1142 5mm Steel
RS Stock No. 124-4800
BrandRS PRO
€0.54
Each
units
DIN 741 5mm Carbon Steel (U-Bolt), Steel (Bridge)
RS Stock No. 197-0168
BrandRS PRO
€24.25
1 Bag of 6
Bag(s)
DIN 1142 10mm Steel
RS Stock No. 124-4801
BrandRS PRO
€0.77
Each
units
DIN 741 6mm Carbon Steel (U-Bolt), Steel (Bridge)
RS Stock No. 197-0174
BrandRS PRO
€45.16
1 Bag of 6
Bag(s)
DIN 1142 13mm Steel
Related Products
This Push Pull Toggle Clamp from our own ...
Description:
This Push Pull Toggle Clamp from our own RS PRO brand offers the advantage of having a low profile, using side or end clamping and are most suitable for applications having a height restriction With large power transmission and minimum ...
High quality Gedore cutter for the clean shearing ...
Description:
High quality Gedore cutter for the clean shearing of wire rope without fanning Ideal for cutting a wide range of materials including Bowden Cables, Stainless Steel Ropes and Textile Cores up to 6mm. Metal Injection Moulded (MIM) High Speed Steel ...
The Newson Gale bond-rite clamp is the only ...
Description:
The Newson Gale bond-rite clamp is the only static grounding clamp that provides operators with visual verification that potentially charged equipment is connected to a verified static grounding point This clamp contains a bright green LED, which pulses continuously when ...
Brought to you under the trusted RS Pro ...
Description:
Brought to you under the trusted RS Pro range, these galvanised steel rigging screws have an eye and hook eye for tensioning wires Simply twist the body to either open or close your adjuster. Hook to Eye rigging screw Rotating ...