Pipe Sealing Cord

What is Pipe Sealing Cord?
Pipe sealing cord is a sealant designed for locking and sealing plastic and metal pipes with thread sizes of up to 4" NPT (National Pipe Thread). The cord is wound from the dispenser on to the threads of the pipe. The fittings are then screwed on and an instant seal is produced. Pipe sealing cord allows small adjustments in the thread to be made before use and is a more effective alternative to paste and hemp combinations.
Benefits
• No cure time, produces an instant, full pressure seal
• Quick and easy to use
• Complies with relevant standards
• Ergonomic dispenser with built-in cutting tool
• Allows small readjustments of up to 45° to be made before use
Application
Pipe sealing cord can be used in both domestic and industrial pipe systems. Applications include pipes and fittings for hot or cold drinking or waste water, gas, compressed air and industrial oils. Pipe sealing cord is often used by plumbers and gas engineers

...
Read more Read less

Filters

Viewing 1 - 3 of 3 products
Results per page
Description Price Application Length Maximum Operating Temperature Chemical Composition Minimum Operating Temperature Odour Operating Temperature Range Package Type Specific Gravity Colour
RS Stock No. 508-6655
Mfr. Part No.483283
BrandLoctite
€5.42
Each
units
Thread Sealing 50m +150°C - - - Maximum of +150 °C - - White
RS Stock No. 123-8817
Mfr. Part No.Loctite 55
BrandLoctite
€15.15
Each
units
Drums, In-Plant Utilities, LPG Lines, Natural Line, Oil Lines, Pneumatics, Pumps, Steam Systems, Tanks, Water Lines 160m 130°C Polyamide -55°C - -55 → +130 °C Container 1.25 White
RS Stock No. 123-8767
Mfr. Part No.Loctite 55
BrandLoctite
€16.04
Each
units
Drums, In-Plant Utilities, LPG Lines, Natural Line, Oil Lines, Pneumatics, Pumps, Steam Systems, Tanks, Water Lines 160mm 130°C Polyamide -55°C Characteristic -55 → +130 °C Container 1.25 White
Related Products
Water-based spatter agent which gives exceptional results without ...
Description:
Water-based spatter agent which gives exceptional results without the use of harmful solvents, silicones or mineral oils. Odourless, non-flammable and safe in use. Fine spray pattern ensures total control and economical coverage. Prevents spatter adhesion on welding equipment, work pieces,surfaces, ...
3M™ Hybrid Adhesive Sealant 760 is a single ...
Description:
3M™ Hybrid Adhesive Sealant 760 is a single component, high strength, elastomeric sealant. This hybrid technology is paintable when wet and will not degrade when exposed to UV. Excellent adhesion. Paintable when wet. Above/below water line use. Low VOC30 Minute ...
One component high performance expanding polyurethane foam, specific ...
Description:
One component high performance expanding polyurethane foam, specific applications include: an aid to mechanical fixings, insulation of door & window frames, supporting good brick work & mortar, fills pipe entries through brick work & walls, expands to fill seal voids ...
An off-white, non-setting compound with good adhesion and ...
Description:
An off-white, non-setting compound with good adhesion and gap filling properties. Unaffected by vibration but can be easily released. Ideal for use on all threaded and face joints on pipe work carrying natural gas, LPG, propane, butane, air, oils and ...