Stepper Motors

A stepper motor is used as an output in electronic circuits. The motor is a brushless DC electric motor that divides a full rotation into a number of equal steps.

The motor’s position can then be made to move and hold at one of these steps without any position sensor for feedback as long as the motor is carefully sized to the application in respect to torque and speed.

Multiple coils are organised in phases (groups). By energising each phase in sequence the motor will rotate, one step at a time.

Why and when to use a Stepper Motor?

With a computer controlled stepping you can achieve very precise positioning and/or speed control.
•Steppers move in precise repeatable steps, they are perfect to use where precise positioning is needed such as 3D printers, CNC and camera platforms.


•Some disk drives use stepper motors to position the read/write head.


•Precise increments of movement also allow for excellent control of rotational speed for process automation and robotics.


•A Stepper motor has maximum torque at low speeds, so they are a good choice for applications where low speed with high precision is needed.



Stepper motor types
•Bipolar drivers use H bridge circuitry to reverse the current flow through the phases. By energising the phases with alternating the polarity all the coils can be put to work turning the motor.


•Permanent magnet motors use a permanent magnet in the rotor. They operate based on the principle that minimum reluctance occurs with minimum gap, meaning the rotor points are attracted towards the stator magnet poles.


•Unipolar drivers always energise the groups in the same way. The common lead will always be negative. They can be implemented with simple transistor circuitry.



Advantages of step motors
•Low cost


•High reliability


•High torque at low speed


•Full torque at standstill

...
Read more Read less

Filters

Viewing 1 - 20 of 177 products
Results per page
Description Price Step Angle Holding Torque Number Of Wires Voltage Rating Frame Size Stepper Motor Type Shaft Diameter Current Rating Winding Arrangement Shaft Length Depth Number of Pole Pairs Resistance Per Phase Detent Torque
RS Stock No. 535-0372
BrandRS PRO
€40.34
Each
units
0.9° 2.2mNm 4 2.8 V 42.3 x 42.3mm Hybrid, Permanent Magnet 5mm 1.33 A - 22mm 33mm - 2.1Ω -
RS Stock No. 535-0502
BrandRS PRO
€71.32
Each
units
0.9° 1.26Nm 4 2.5 V 56.4 x 56.4mm Hybrid, Permanent Magnet 6.35mm 2.8 A Unipolar 19mm 56mm - 0.9Ω -
RS Stock No. 535-0467
BrandRS PRO
€27.94
Each
units
1.8° 0.22Nm 4 2.8 V 42.3 x 42.3mm Hybrid, Permanent Magnet 5mm 1.33 A - 22mm 33mm - 2.1Ω -
RS Stock No. 892-8732
BrandRS PRO
€29.76
Each
units
1.8° 0.36Nm 4 2.8 V 42.3 x 42.3mm Hybrid, Permanent Magnet 5mm 1.68 A - 22mm 62mm 1 1.65Ω -
RS Stock No. 535-0423
BrandRS PRO
€77.30
Each
units
1.8° 1.0Nm 4 2.3 V 56.4 x 56.4mm Hybrid, Permanent Magnet 6.35mm 2.8 A - 19mm 51mm - 0.83Ω 35mNm
RS Stock No. 535-0401
BrandRS PRO
€49.61
Each
units
0.9° 0.44Nm 4 2.8 V 42.3 x 42.3mm Hybrid 5mm 1.68 A - 24mm 47mm - 1.65Ω -
RS Stock No. 535-0366
BrandRS PRO
€89.95
Each
units
1.8° 0.12Nm 4 6.2 V 28 x 28mm Hybrid, Permanent Magnet 5mm 670 mA - 18mm 51mm - 9.2Ω -
RS Stock No. 535-0445
BrandRS PRO
€86.85
Each
units
1.8° 1.89Nm 4 3.2 V 56.4 x 56.4mm Hybrid, Permanent Magnet 6.35mm 2.8 A - 19mm 76mm - 1.13Ω 72mNm
RS Stock No. 535-0439
BrandRS PRO
€80.81
Each
units
1.8° 1.26Nm 4 2.5 V 56.4 x 56.4mm Hybrid, Permanent Magnet 6.35mm 2.8 A - 19mm 56mm - 0.9Ω 42mNm
RS Stock No. 535-0344
BrandRS PRO
€62.05
Each
units
1.8° 60mNm 4 3.8 V 28 x 28mm Hybrid, Permanent Magnet 5mm 670 mA - 18mm 32mm - 5.6Ω -
RS Stock No. 535-0489
BrandRS PRO
€34.11
Each
units
1.8° 0.44Nm 4 2.8 V 42.3 x 42.3mm Hybrid, Permanent Magnet 5mm 1.68 A - 22mm 47mm - 1.65Ω -
RS Stock No. 798-3646
BrandRS PRO
€119.31
Each
units
1.8° 1.96Nm 6 4.4 V dc 85.8 x 85.8mm Bipolar, Unipolar 14mm 2 A Unipolar 137mm 66mm - 2.2Ω -
RS Stock No. 892-8735
BrandRS PRO
€81.06
Each
units
1.8° 0.78Nm 8 2.1 V, 3 V, 4.2 V 60 x 60mm Hybrid, Permanent Magnet 7.5mm 2 A Parallel, Series, Unipolar 22.4mm 69mm 1 1.5Ω -
RS Stock No. 440-470
BrandRS PRO
€117.10
Each
units
1.8° 2.2Nm 8 2.5 V dc 82.6 x 82.6mm Hybrid 9.5mm 4.5 A - 152.9mm 94mm - 0.56Ω -
RS Stock No. 892-8739
BrandRS PRO
€112.61
Each
units
1.8° 1.17Nm 8 2.52 V, 3.6 V, 5.04 V 60 x 60mm Hybrid, Permanent Magnet 7.5mm 2 A Parallel, Series, Unipolar 22.4mm 80mm 1 1.8Ω -
RS Stock No. 798-3643
BrandRS PRO
€119.31
Each
units
1.8° 1.76Nm 6 5.1 V dc 56.4 x 56.4mm Bipolar, Unipolar 6.35mm 3 A Unipolar 139.6mm 103mm - 1.7Ω -
RS Stock No. 535-0338
BrandRS PRO
€52.74
Each
units
1.8° 17.5mNm 4 3.96 V 20.2 x 20.2mm Hybrid, Permanent Magnet 4mm 600 mA - 5mm 33mm - 6.5Ω -
RS Stock No. 892-8723
BrandRS PRO
€62.05
Each
units
1.8° 0.21Nm 4 9 V 39.2 x 39.2mm Hybrid, Permanent Magnet 5mm 600 mA - 22mm 58mm 1 15Ω -
RS Stock No. 191-8362
BrandRS PRO
€52.77
Each
units
1.8° 0.88Nm 8 5.4 V dc 56.4 x 56.4mm Hybrid 6.35mm 1.4 A - 116.6mm 76mm - 3.6Ω -
RS Stock No. 892-8741
BrandRS PRO
€192.30
Each
units
1.8° 2.2Nm 8 4.17 V, 6 V, 8.4 V 60 x 60mm Hybrid, Permanent Magnet 7.5mm 2 A Parallel, Series, Unipolar 22.4mm 110mm 1 -
Related Products
Because of their optimized magnetic core, the brushless ...
Description:
Because of their optimized magnetic core, the brushless EC-i motors with iron core windings offer a very high torque density and low cogging torque The multi-pole internal rotor is extremely dynamic. Its solid design with a steel flange and housing ...
Variable speed motor Simply connect a speed control ...
Description:
Variable speed motor Simply connect a speed control potentiometer for proportional velocity control Digital output signal enables motor speed to be accurately monitored Smooth running over a wide speed range Ideal for pumps, mixers, stirrers and small conveyors
Variable speed brushless motor with integrated drive electronics ...
Description:
Variable speed brushless motor with integrated drive electronics eg. speed control The integration of power amplifier & speed loop circuitry within the motor greatly simplifies control Simply connect a speed control potentiometer and direction switch for bi-direction velocity control Digital ...
DCmind Brush Motors, a range of high-performance direct ...
Description:
DCmind Brush Motors, a range of high-performance direct current brush motors These series of motors are very quit and exceptional efficiency and working life.These are ideal for use in medical equipments, pumps and valves, railways, and aeronautics. 24 Vdc version ...