Cable Moulded Parts

Filters

Viewing 1 - 20 of 267 products
Results per page
Description Price Type Inside Diameter Primary Inside Diameter Secondary Adhesive Lined Material Number of Breakouts Shrink Temperature Colour Minimum Operating Temperature Maximum Operating Temperature Shrunk Diameter Primary Shrunk Diameter Secondary Series Standards Met
RS Stock No. 167-9562
Mfr. Part No.317-1399-000/ENDGEHÄUSE SURE SEAL SS4+3POL
BrandITT Cannon
€9.01
Each
units
Cable Boot 19.05mm 12.7mm No - 1 - - -40°C +105°C - - - -
RS Stock No. 316-0896
Mfr. Part No.ES-CAP-NO.1-C1-0-30MM-RS
€13.22
1 Bag of 100
Bag(s)
End Cap 5.72mm - Yes Semi-Rigid Polyolefin - +100°C Black -40°C +105°C 1.27mm - - -
RS Stock No. 397-663
Mfr. Part No.KHKB-13360
€13.54
1 Pack of 5
Pack(s)
End Cap 35mm - Yes Polyolefin - - Black -40°C +85°C 15mm - - -
RS Stock No. 397-657
Mfr. Part No.KHKB-13359/2
€19.98
1 Pack of 5
Pack(s)
End Cap 20mm - Yes Polyolefin - - Black -40°C +85°C 7.5mm - - -
RS Stock No. 724-2469
Mfr. Part No.DT2S-BT-BK
BrandDeutsch
€1.05
Each (In a Bag of 5)
units
Plug Cable Boot - - - Plastic 1 - Black -28.88°C +100°C - - - -
RS Stock No. 724-2481
Mfr. Part No.DT6S-BT-BK
BrandDeutsch
€1.864
Each (In a Bag of 5)
units
Plug Cable Boot - - - Plastic 1 - Black -28.88°C +100°C - - - -
RS Stock No. 782-5027
Mfr. Part No.GELWRAP-18/4-250UL-B6
€25.13
Each
units
Inline Splice - - - Silicone Gel - - Black - - - - - -
RS Stock No. 724-2462
Mfr. Part No.DT3P-BT-BK
BrandDeutsch
€1.976
Each (In a Bag of 5)
units
Receptacle Cable Boot - - - Plastic 1 - Black -28.88°C +100°C - - - -
RS Stock No. 167-9540
Mfr. Part No.317-1398-000/ENDGEHÄUSE SURE SEAL SS 2 POL
BrandITT Cannon
€8.626
Each (In a Pack of 5)
units
Cable Boot 16.51mm 9.65mm No - 1 - - -40°C +105°C - - - -
RS Stock No. 420-772
Mfr. Part No.901-10277
€12.91
Each
units
Straight Cable Boot 31mm 31mm No Fluid Resistant Elastomer 1 +135°C Black -75°C +150°C 18mm 7mm - -
RS Stock No. 299-6111
Mfr. Part No.102L048-37/239CS163
€7.46
Each
units
End Cap 75mm - Yes Polyolefin - - Black -40°C +85°C 32mm - - -
RS Stock No. 279-4836
Mfr. Part No.202K163-100-0
€17.92
Each
units
Straight Cable Boot 43mm 25mm No LFH Polyolefin 1 - Black -30°C +105°C 28.2mm 9.9mm - -
RS Stock No. 218-1426
Mfr. Part No.382A012-25-0
€9.07
Each
units
Y Joint Cable Boot 13.2mm 6.6mm No Fluid Resistant Elastomer 2 +135°C Black -75°C +150°C 6.1mm 3.3mm - -
RS Stock No. 724-2490
Mfr. Part No.DT12S-BT-BK
BrandDeutsch
€2.40
Each (In a Bag of 5)
units
Plug Cable Boot - - - Plastic 1 - Black -28.88°C +100°C - - - -
RS Stock No. 316-0931
Mfr. Part No.ES-CAP-NO.2-B9-0-30MM-RS
€13.87
1 Bag of 100
Bag(s)
End Cap 7.44mm - Yes Semi-Rigid Polyolefin - +100°C Black -40°C +105°C 1.65mm - - -
RS Stock No. 837-2467
Mfr. Part No.202K174-25L-0
€24.52
Each
units
Cable Boot 35.1mm 15.7mm - Fluid Resistant Elastomer 1 - Black -75°C +150°C - - - -
RS Stock No. 622-3833
Mfr. Part No.402-23058 223-2-B8W-PO-X-BK
€17.68
Each
units
Y Joint Cable Boot 33mm 17.5mm Yes Polyolefin Cross Linked (POX) 2 +135°C Black -55°C +80°C 9.4mm 4.1mm - -
RS Stock No. 874-1497
Mfr. Part No.PD-CAP-1/8-0
€30.28
1 Pack of 300
Pack(s)
PD CAP 3.18mm - - Polyolefin - +125°C Black -55°C +110°C 0.58mm - PD Caps UL E85381
RS Stock No. 782-5023
Mfr. Part No.GELWRAP-18/4-150UL-B6
€20.20
Each
units
Inline Splice - - - Silicone Gel - - Black - - - - - -
RS Stock No. 718-3118
Mfr. Part No.202K132-3/42-0
€20.43
Each
units
Straight Cable Boot 30mm 30mm Yes Modified Polyolefin 1 - - -20°C +105 °C, +60 °C 14.2mm 5.9mm - -
Related Products
T-shaped moulded parts with 45° or 90° side ...
Description:
T-shaped moulded parts with 45° or 90° side breakouts. Manufactured from heat shrink DR-25 material these moulded parts have good resistance to aggressive chemicals at high temperature. • Provides strain relief, protection and mechanical support• Shrink Ratio 2:1• Flame retardant. ...
T-shaped moulded parts with 45° or 90° side ...
Description:
T-shaped moulded parts with 45° or 90° side breakouts. Manufactured from heat shrink DR-25 material these moulded parts have good resistance to aggressive chemicals at high temperature. • Provides strain relief, protection and mechanical support• Shrink Ratio 2:1• Flame retardant. ...
General purpose Y-Shaped heat shrink moulded parts. These ...
Description:
General purpose Y-Shaped heat shrink moulded parts. These heat shrink boots provide strain relief and protection on cable harnesses. • Y-Shape transition• Good resistance to aggressive chemicals at high temperature• Manufactured from fluid resistant elastomer• Available with 2, 3 or ...
Ensures that cable ends are waterproof and permits ...
Description:
Ensures that cable ends are waterproof and permits long term storage without risk of moisture penetration. It is a medium wall moulded cap internally coated with an adhesive sealant.,Installation is simple, the cap is centred over the end of the ...