IEC Connectors

IEC Connectors are used as power couplers for electrical appliances. IEC refers to the set of standards from the International Electrotechnical Commission, ensuring that the power cords for appliances conform to a standardized set of safety requirements for appliances not exceeding a 250 V ac voltage or 16 A rated current.
For everything to domestic kitchen equipment to computer hardware in office environments, the IEC connector is available in different sizes and shapes to accommodate the current, temperature and earthing requirements of different appliances.


IEC Types:



  • C1/C2- Used for small electrical appliances such as electric trimmers or shavers.

  • C5/C6- Known as a cloverleaf, this power connector is used in smaller electrical appliances such as projectors.

  • C7/C8- The figure-eight connector is commonly used in personal stereo systems and some older laptop models.

  • C13/C14- This connector is used for larger electrical appliances, such as kitchen appliances, instrumentation amplifiers and computer hard drives.

  • C15/C16- This connector is often referred to as a kettle lead due to its use in powering electric kettles. They are well suited to this task due to their designation as a ’hot condition’ coupler and having a high-temperature rating

  • C15A/C16A- Is similar to the C15 and C16, but is rated for a higher temperature.

  • C17/C18- Is an unearthed power connector that is used in audio applications when audio quality is a concern.

  • C19/C20- Is a power connector for high current applications, such as uninterruptible power supplies or power distribution units.


...
Read more Read less

Filters

Viewing 1 - 20 of 976 products
Results per page
Description Price IEC Connector Type Mounting Type Gender Current Rating Body Orientation Termination Method Switch Type Number of Fuses Voltage Rating Rewireable Fuse Size Maximum Cable Diameter Shuttered Series
RS Stock No. 776-9113
BrandRS PRO
€2.55
Each
units
C14 Cable Mount Male 10.0A Straight Screw None None 250.0 V Yes - - - -
RS Stock No. 776-9129
BrandRS PRO
€3.56
Each
units
C19 Cable Mount Female 16.0A Straight Screw None None 250.0 V Yes - - - -
RS Stock No. 776-9125
BrandRS PRO
€3.87
Each
units
C20 Cable Mount Male 16.0A Straight Screw None None 250.0 V Yes - - - -
RS Stock No. 488-191A
BrandRS PRO
€46.68
1 Pack of 25
Pack(s)
C14 Panel Mount Male 10.0A Straight Solder, Spade None - 250.0 V - - - - -
RS Stock No. 488-191
BrandRS PRO
€4.71
Each
units
C14 Panel Mount Male 10.0A Straight Solder, Spade None - 250.0 V - - - - -
RS Stock No. 776-9122
BrandRS PRO
€3.04
Each
units
C13 Cable Mount Female 10.0A Straight Screw None None 250.0 V Yes - - - -
RS Stock No. 776-9131
BrandRS PRO
€1.27
Each
units
C14 Snap-In Male 10.0 A, 15.0A Straight Solder None None 250.0 V - - - - -
RS Stock No. 811-7193
BrandRS PRO
€2.12
Each
units
C13 Panel Mount Female 10.0 A, 15.0A Straight Solder/Faston None None 250.0 V - - - - -
RS Stock No. 776-9135
BrandRS PRO
€0.98
Each
units
C20 Panel Mount Male 20.0A Straight Solder/Faston None None 250.0 V - - - - -
RS Stock No. 811-7207
BrandRS PRO
€0.98
Each
units
C14 Panel Mount Male 10.0 A, 15.0A Straight Solder None None 250.0 V - - - - -
RS Stock No. 776-9144
BrandRS PRO
€1.44
Each
units
C19 Panel Mount Female 20.0A Straight Solder/Faston None None 250.0 V - - - - -
RS Stock No. 811-7216
BrandRS PRO
€2.35
Each
units
C14 Snap-In Male 6.0A Straight Solder/Faston 2 Pole 1 250.0 V - 5 x 20mm - - -
RS Stock No. 811-7226
BrandRS PRO
€2.35
Each
units
C14 Snap-In Male 6.0A Straight Solder/Faston 2 Pole 1 250.0 V - 5 x 20mm - - -
RS Stock No. 811-7197
BrandRS PRO
€3.58
Each
units
C13 Snap-In Female 10.0 A, 20.0A Straight Solder/Faston None None 250.0 V - - - - -
RS Stock No. 776-9138
BrandRS PRO
€1.92
Each
units
C13 Snap-In Female 15.0A Straight Solder/Faston None None 250.0 V - - - - -
RS Stock No. 896-2149
BrandRS PRO
€6.776
Each (In a Pack of 5)
units
- Snap-In Female 20.0A Straight Faston - - 250.0 V - - - - -
RS Stock No. 811-7222
BrandRS PRO
€2.35
Each
units
C14 Snap-In Male 6.0A Straight Solder/Faston 2 Pole 1 250.0 V - 5 x 20mm - - -
RS Stock No. 811-7210
BrandRS PRO
€2.35
Each
units
C14 Snap-In Male 6.0A Straight Solder/Faston 2 Pole 1 250.0 V - 5 x 20mm - - -
RS Stock No. 811-7213
BrandRS PRO
€2.63
Each
units
C14 Panel Mount Male 10.0A Straight Solder/Faston None 1 250.0 V - 5 x 20mm - - -
New
RS Stock No. 203-5562
BrandRS PRO
€6.19
Each (In a Bag of 5)
units
C14 Panel Mount Male 10A Straight Snap-In - - 250 V - - - - -
Related Products
Panel mount IEC appliance inlets with a screw ...
Description:
Panel mount IEC appliance inlets with a screw mount in a right angle style that are suitable for automatic PCB assembling Maximum pin temperature 70°C. The fuseholder on the inside of the equipment prevents accidental use of incorrect fuse-links by ...
PCB mounting (screw or rivet) suitable for flow ...
Description:
PCB mounting (screw or rivet) suitable for flow wave soldering240Vac/10A rated, compliant to BS 4491Flammability rating UL94V-0Kite mark licence no 6745Version with pin cover also available (stock no 261-5840).
Manufactured in nylon, UL94V-0 rated Panel plug connection ...
Description:
Manufactured in nylon, UL94V-0 rated Panel plug connection by 63mm (0.25in) receptacles Cable dia. to fit boot: 7.6mm max. Dimensions (mm) Depth 33, Hole dia 3.5, FC 40Cut out: 27.4x19.8mm radius 5.
A selection of RoHS compliant cold condition C20 ...
Description:
A selection of RoHS compliant cold condition C20 inlets with 63mm tabs, in flange mount and snap fit to panel versions and a C19 female cable plug which features screw terminals, wire size maximum 3x2.5mm2 (3x12AWG) and a maximum cable ...