Distribution Blocks

The primary function of a distribution block is to supply power more efficiently to a series of devices. The secondary function is to isolate short circuit incidents to prevent complete shutdown from occurring. Distribution blocks can handle a range of frequencies and currents. Using distribution blocks requires only one large wire on the input side to link each connected device back to the power source. This eliminates the need for separate wiring of each device. 


What are distribution blocks used for?

Distribution blocks are used in various industries:

  • Heating/cooling for operating heaters, cooling systems and ventilation equipment.
  • Power distribution control in the form of voltage transformers, uninterrupted power supply units and distribution cabinets. 
  • Solar, wind and turbine as the power supply to distribute energy.
  • Electrical vehicles for charging stations.
  • Electronic automation, including elevators, lifting equipment and conveyor systems.

Types of distribution blocks

The two main types of distribution block are:

  • Bussed (enclosed) blocks, which allow for a larger input cable to be split out into smaller cables for branch circuits.
  • Independent blocks, which enable multiple individual circuits to be routed to a single location as they are not connected to each other.

...
Read more Read less

Filters

Viewing 1 - 20 of 73 products
Results per page
Description Price Number of Ways Termination Method Wire Size Housing Material IP Rating Current Rating Voltage Rating Cable CSA Length Width Height Colour Maximum Operating Temperature Minimum Operating Temperature
RS Stock No. 383-1582
Mfr. Part No.1SNA115409R2600
BrandEntrelec
€6.98
Each
units
5 Clamp 12 AWG - - 32A 800 V 4mm² 32.5mm - 53mm Grey - -
RS Stock No. 383-1576
Mfr. Part No.1SNA115408R2500
BrandEntrelec
€5.53
Each
units
4 Clamp 12 AWG - - 32A 800 V 4mm² 26.5mm - 53mm Grey - -
RS Stock No. 383-1560
Mfr. Part No.1SNA115407R1400
BrandEntrelec
€4.34
Each
units
3 Clamp 12 AWG - - 32A 800 V 4mm² 20.5mm - 53mm Grey - -
RS Stock No. 277-2151
Mfr. Part No.0 048 24
BrandLegrand
€12.23
Each
units
13 Screw Down - PC - 100A 400 V ac 1.5 → 16 mm², 6 → 25 mm² 113mm - - - +40°C -5°C
RS Stock No. 705-5537
Mfr. Part No.0 048 42
BrandLegrand
€10.96
Each
units
8 Screw Down - PC IP20 80A 400 V ac 1.5 → 16mm² 75mm - - Blue +40°C -5°C
RS Stock No. 277-9837
Mfr. Part No.0 048 36
BrandLegrand
€29.83
Each
units
22 Screw Down - PC IP20 100A 400 V ac 1.5 → 16 mm², 6 → 25 mm² 176mm - - Green +40°C -5°C
RS Stock No. 868-0720
BrandRS PRO
€21.03
Each
units
- Screw 6 → 16 (With End Sleeve) mm², 10 → 25 (Without End Sleeve) mm² PC - 100A 500 V - 87mm 50mm - - - -
RS Stock No. 413-2347
Mfr. Part No.1SNA179892R2200
BrandEntrelec
€100.50
Each
units
11 Screw Down 6 → 0 AWG, 10 → 2 AWG, 14 → 6 Copper Aluminium Alloy - 160A 600 V 10-50 inputmm² 160.5mm 91mm 59.5mm Grey - -
RS Stock No. 383-1598
Mfr. Part No.1SNA115412R0000
BrandEntrelec
€13.53
Each
units
10 Clamp 12 AWG - - 32A 800 V 4mm² 62.5mm - 53mm Grey - -
RS Stock No. 277-9770
Mfr. Part No.0 048 54
BrandLegrand
€15.80
Each
units
13 Screw Down - PC IP20 100A 400 V ac 1.5 → 16 mm², 6 → 25 mm² 113mm - - Black +40°C -5°C
RS Stock No. 239-5164
Mfr. Part No.7602.2100.4
BrandKopp
€40.83
Each
units
2 - - - - - 230 V ac - - - - - - -
RS Stock No. 100-3920
Mfr. Part No.1SNL312510R0000
BrandEntrelec
€20.10
Each
units
8 Screw Down 8 → 2 (End 1) AWG, 10 → 6 (End 1) AWG, 14 → 6 (End 2) AWG Polyamide IP20 125A 1 kV ac, 1.5 kV dc 2.5 → 16 (End 2) mm², 6 → 16 (End 1) mm², 10 → 35 (End 1) mm² 28.2mm 50.7mm 75mm Grey +110°C -55°C
RS Stock No. 277-9809
Mfr. Part No.0 048 30
BrandLegrand
€8.57
Each
units
4 Screw Down - PC IP20 80A 400 V ac 1.5 → 16mm² 47mm - - Green +40°C -5°C
RS Stock No. 705-5533
Mfr. Part No.0 048 40
BrandLegrand
€8.35
Each
units
4 Screw Down - PC IP20 80A 400 V ac 1.5 → 16mm² 47mm - - Blue +40°C -5°C
RS Stock No. 441-4330
BrandRS PRO
€76.45
Each
units
12 Screw Down - PC - 160A 500 V 16 mm², 25 mm², 50 mm² 150mm 84mm 48mm Clear - -
RS Stock No. 100-3923
Mfr. Part No.1SNL325010R0000
BrandEntrelec
€69.71
Each
units
12 Screw Down 2 → 250 (End 1) Kcmil, 14 → 2 (End 2) AWG, 14 → 6 (End 2) AWG, 14 → 8 (End 2) AWG Polyamide IP10 250A 1 kV ac, 1.5 kV dc 2.5 → 10 (End 2) mm², 2.5 → 16 (End 2) mm², 2.5 → 35 (End 2) mm², 35 → 120 (End 1) mm² 46mm 60mm 96mm Grey +110°C -55°C
RS Stock No. 383-1554
Mfr. Part No.1SNA115406R1300
BrandEntrelec
€3.06
Each
units
2 Clamp 12 AWG - - 32A 800 V 4mm² 14.5mm - 53mm Grey - -
RS Stock No. 413-2319
Mfr. Part No.1SNA179534R2200
BrandEntrelec
€39.05
Each
units
8 Screw Down 6 AWG, 8 AWG Copper Aluminium Alloy - 80A 600 V 16 inputmm² 88mm 85mm 60mm Grey - -
RS Stock No. 180-6100
Mfr. Part No.0 048 32
BrandLegrand
€100.70
1 Box of 10
Box(es)
8 Screw 1.5 → 16 mm² PC IP20 80 A, 100 A 400 V - 75mm - - Green +40°C -5°C
RS Stock No. 138-3509
Mfr. Part No.1561830000
BrandWeidmuller
€53.35
1 Pack of 3
Pack(s)
2 (Input), 2 (Output) Screw 8 AWG Wemid - 160 (UR) A, 300 A 1 kV ac/dc, 600 V 50 mm², 70 mm² 32.9mm 53.1mm 63mm Black +130°C -50°C
Related Products
Range of W series (WPD) distribution blocks from ...
Description:
Range of W series (WPD) distribution blocks from Weidmuller. These distribution blocks range from 0.05 mm² to 300 mm² allowing you to have diverse options for your application. The WPD series distribution blocks are housed with Wemid for increased safety ...
Range of W series (WPD) distribution blocks from ...
Description:
Range of W series (WPD) distribution blocks from Weidmuller. These distribution blocks range from 0.05 mm² to 300 mm² allowing you to have diverse options for your application. The WPD series distribution blocks are housed with Wemid for increased safety ...
Commoning terminals equipped with plastic housing to provide ...
Description:
Commoning terminals equipped with plastic housing to provide IP 2X protection.These terminals are supplied with captive screws that have been loosened to facilitate mounting.May be mounted on DIN rail, support or 12 x 2 flat bar.
Commoning terminals equipped with plastic housing to provide ...
Description:
Commoning terminals equipped with plastic housing to provide IP 2X protection.These terminals are supplied with captive screws that have been loosened to facilitate mounting.May be mounted on DIN rail, support or 12 x 2 flat bar.