Crimp Terminal Kits

Crimping is a way of terminating strands of wire in order to connect them to external circuits, using a crimping tool to squeeze a wire hard enough to cold weld it to a given terminal. Crimp terminal kits consist of a crimping tool and various types of terminal.


The advantage of crimping is that it forms gas-tight connections, so there is less corrosion of the wire, and the joints are mechanically strong as there is no additional material used, as opposed to soldering.


How do crimp terminal kits work?


There are broadly three steps to using crimp terminal kits:

  1. Insert the desired terminal into the crimping tool
  2. Insert the wire into the terminal
  3. Squeeze together the handles of the crimping tool to cold weld the terminal onto the wire

Types of crimp terminal


Crimp terminals can have different connectors, such as rings, spades, and butt splice terminals, depending on how you want to connect to the external circuit. There are also insulated and non-insulated terminals, depending on your price point and the needs of the circuit. Non-insulated terminals are cheaper but may short in certain environments, whereas insulated terminals protect against this.


...
Read more Read less

Filters

Viewing 1 - 20 of 48 products
Results per page
Description Price Type Connector Type Kit Contents Contact Plating Contact Material
RS Stock No. 228-0321
BrandRS PRO
€28.76
Each
units
French Colour Coded Bootlace Ferrule 0.5mm² → 10mm² Wire End Ferrules - -
RS Stock No. 534-828
BrandRS PRO
€41.12
1 Kit
Kit(s)
230 Piece Insulated Terminal Blade terminals and Crimp Tool, Butt Splice, Receptacle, Spade, 0.5mm² → 6mm² Ring - -
RS Stock No. 513-2540
BrandRS PRO
€24.84
Each
units
400 Piece Bootlace Ferrule 0.5mm² → 2.5mm² Wire End Ferrules - -
RS Stock No. 613-9952
BrandRS PRO
€95.29
1 Kit
Kit(s)
800 Piece Insulated Terminal Butt Splice, Pin terminals and Crimp Tool, Receptacle, Spade, 0.5mm² → 6mm² Ring - -
RS Stock No. 513-2562
BrandRS PRO
€26.30
Each
units
German Colour Coded Bootlace Ferrule 0.5mm² → 2.5mm² Wire End Ferrules - -
RS Stock No. 109-797
BrandRS PRO
€98.67
Each
units
500 Piece Insulated Terminal Butt Splice, Pin terminals and Crimp Tool, Receptacle, Spade, 0.5mm² → 6mm² Ring - -
RS Stock No. 441-5535
Mfr. Part No.A801632T
€98.97
Each
units
- Insulated Terminal Cable Tie Tool, Cable Ties, Crimp Tool, Insulated Terminals - -
RS Stock No. 408-9681
Mfr. Part No.DS-MIXT-04-RSU
€39.02
Each
units
DuraSeal Service and Repair Heat Shrink Terminals and Splices Receptacle, Ring, Spade, Splice - -
RS Stock No. 847-8868
Mfr. Part No.KP-1075Y
BrandPanduit
€81.63
Each
units
- Insulated Terminal (10) BSV10X, (10) BSV14X, (10) BSV18X, (10) DNF14-250, (10) DNF18-250, (10) JN418-212 Nylon Wire Joint, (10) PV10-8R, (20) PV18-6F, (20) PV18-8R Vinyl Ring Terminal, PV10-10R Vinyl Ring Terminal, PV14-10R, PV14-8F Vinyl Fork Terminal - -
RS Stock No. 266-0288
BrandRS PRO
€59.50
Each
units
French Colour Coded Bootlace Ferrule 0.5mm² → 10mm² Wire End Ferrules and crimp tool - -
RS Stock No. 815-6710
Mfr. Part No.A8190227T
€152.98
1 Kit
Kit(s)
- Heat Shrink Terminals and Splices Crimp Tool, 225 Assorted Heat Shrink Terminals - Copper
RS Stock No. 408-9697
Mfr. Part No.DS-MIXT-05-RSU
€70.62
Each
units
DuraSeal Service and Repair Heat Shrink Terminals and Splices 0 x Duraseal Splice, 10 x Durseal Spade, 25 x Durseal Receptacle, 100 x Durseal Ring Terminal - Copper
RS Stock No. 414-6611
Mfr. Part No.165154
€393.05
Each
units
Repair PIDG Splices/Terminals Faston Receptacle, Partition, PG Butt Splice, Ring Tongue, Spade, Wire Pin - -
RS Stock No. 414-6835
Mfr. Part No.H-BOX 0,5-2,5QMM -9025900000
BrandWeidmuller
€34.48
Each
units
- Bootlace Ferrule 0.5mm² → 2.5mm² Wire End Ferrules - -
RS Stock No. 425-8770
Mfr. Part No.CRIMP-SET PZ 6/5 -9028740000
BrandWeidmuller
€284.92
Each
units
- Bootlace Ferrule 0.5mm² → 6mm² Wire End Ferrules - -
RS Stock No. 513-2556
BrandRS PRO
€16.38
Each
units
90 Piece Bootlace Ferrule 4mm² → 16mm² Wire End Ferrules - -
RS Stock No. 243-1052
Mfr. Part No.165346
€286.79
Each
units
PIDG Introduction Service PIDG Splices/Terminals, Plasti-Grip Terminals Case, Flanged Spade, Partition, PG Butt Splice, PIDG Ring Tongue, PIDG Spade, SRS Line Splice Connector, SRS PIDG Faton Receptacle, SRS PIDG Piggyback Faston - -
RS Stock No. 278-9395
Mfr. Part No.142945-1
€379.04
Each
units
- Plasti-Grip Terminals and Splices Clip, Connection, Fork, Round Terminal - -
RS Stock No. 243-1046
Mfr. Part No.165430
€337.76
Each
units
- Plasti-Grip Terminals and Splices Butt Splice, Closed End Connector, Piggyback, Pin, Receptacle, Ring, Spade - -
RS Stock No. 425-8786
Mfr. Part No.CRIMP-SET PZ 16 -9025850000
BrandWeidmuller
€480.65
Each
units
- Bootlace Ferrule 6mm² → 16mm² Wire End Ferrules - -
Related Products
A range of french colour coded insulated bootlace ...
Description:
A range of french colour coded insulated bootlace wire ferrules made from soft tin plated electrolytic copper with a polypropylene insulating sleeve with dimensions that conform to DIN 46228-4: 1990-09 and color coding to french standard NF C 63-023: 1994-02For ...
A range of french colour coded insulated bootlace ...
Description:
A range of french colour coded insulated bootlace wire ferrules made from soft tin plated electrolytic copper with a polypropylene insulating sleeve with dimensions that conform to DIN 46228-4: 1990-09 and color coding to french standard NF C 63-023: 1994-02For ...
A range of insulated bootlace wire ferrules made ...
Description:
A range of insulated bootlace wire ferrules made from soft tin plated electrolytic copper with a polypropylene insulating sleeve with a colour range that conforms to DIN 46228-4: 1990-09 These insulated bootlace wire ferrules are available with twin wire entries ...
AI-TWIN Series Insulated TWIN Bootlace Wire Ferrules for ...
Description:
AI-TWIN Series Insulated TWIN Bootlace Wire Ferrules for crimping 2 conductors These TWIN Bootlace Wire Ferrules are made from tin plated copper with a polypropylene plastic sleeve.For suitable hand crimp tools see stock numbers 803-4310, 803-4313 and 803-4405 typically.