Enclosure Heaters

Enclosure heaters, or cabinet heaters, are used to warm the air inside electrical devices and to regulate the internal conditions of your device. They are used in a variety of devices, most commonly heaters and 3D printers


How enclosure heaters work


Enclosure heaters are designed to help electric, electronic, pneumatic, hydraulic and mechanical equipment to perform at its best by protecting against low temperatures, condensation and corrosion. They do this by providing an evenly distributed interior air temperature. 


Why are enclosure heaters important?


By keeping the internal temperature of a device as little as five degrees higher than the ambient temperature, the risk of condensation can be eliminated. The warmer the air, the more water vapour it can contain. When air is cooled it can no longer hold the water vapour and reaches its dew point – this is where condensation arises. It's important to avoid the presence of condensation in your device as this can cause it to fail or become damaged. 


...
Read more Read less

Filters

Viewing 181 - 186 of 186 products
Results per page
Description Price Output Power Air Flow Input Power Rating Supply Voltage Surface Temperature Depth Height Width Frequency Nominal Current Series
RS Stock No. 677-0761
Mfr. Part No.FGC3001
€132.56
Each
units
200 W, 300 W, 400 W 13m³/h - 115 V ac - - - - - - -
RS Stock No. 177-8994
Mfr. Part No.NSYCR170W230VVC
€189.90
Each
units
- - 177W 230 V ac +70 (Operation)°C 90mm 75mm 65mm 50/60Hz - ClimaSys CR
RS Stock No. 697-4382
Mfr. Part No.02800.0-01
BrandSTEGO
€91.98
Each
units
150W 13.8m³/h - 230 V ac - 87mm 114mm 65mm - - -
RS Stock No. 779-0785
Mfr. Part No.FLH-T400 17040310007
€223.55
Each
units
400W 160 m³/h, 180 m³/h 450W 230 V 40°C 164mm 100mm 150mm - - -
RS Stock No. 182-9854
Mfr. Part No.04640.1-00
BrandSTEGO
€181.09
Each
units
250W 26 (AC) cfm, 32 (AC) cfm, 32 (DC) cfm - 24 V dc +75°C 100mm 85mm 182mm 50/60Hz - HGL 046
RS Stock No. 829-9154
Mfr. Part No.PFH 1000 230V 17099610030
€201.67
Each
units
1000W 80m³/h 1015W 230 V +55°C 126mm 142mm 88mm - - -
Related Products
Heaters specifically intended for anti-condensation and frost protection ...
Description:
Heaters specifically intended for anti-condensation and frost protection in control and equipment cabinets All types are supplied with DIN rail mounting hardware. Suitable for both 50Hz or 60Hz operation Duty cycle 100%Heating element is PTC (positive temperature coefficient), temperature regulating ...
Plug-in terminal connection Suitable for both 50Hz and ...
Description:
Plug-in terminal connection Suitable for both 50Hz and 60Hz Duty cycle 100%Heating element is resistance type with temperature monitor Mounting position is airflow vertical, exit at top Airflow 50m3/h (50Hz), 61m3/h (60Hz)Constructed from aluminium extrusion, clear anodised Binding post connection ...
Plug-in terminal connection Suitable for both 50Hz and ...
Description:
Plug-in terminal connection Suitable for both 50Hz and 60Hz Duty cycle 100%Heating element is resistance type with temperature monitor Fitting position is airflow vertical, exit at top Airflow 50m3/h (50Hz), 61m3/h (60Hz)Constructed from aluminium extrusion, clear anodised Binding post connection ...
Large surface area, anodised aluminium heaters with long ...
Description:
Large surface area, anodised aluminium heaters with long service life and no mechanical parts They have class I insulation. Surface mounting clips are available separately. Protected to IP54. Comply with DIN VDE 0700 Part 1 and EN60335/1Tropicalised Self regulating PCT ...