Heatsink Mounting Accessories

Heatsink mounting accessories support the attachment of heatsinks to their components. Heatsinks are passive heat exchangers: they take the heat generated by electrical or mechanical devices and transfer it to a disposable medium, often liquid coolant or air. There's a wide selection of heatsink mounting accessories, including clips, adhesive tape, retaining springs, hi-flow insulators and graphite pads. Choosing the right mounting accessories can improve your heatsink’s performance.

Types of heatsink mounting accessories

A range of heatsink mounting accessories is available, depending on your needs. Spring clips can be used with all sizes of vertical-mount heatsinks where transistors have no mounting tabs. Heatsink spring mount rivets are used to fasten a heatsink to a processor on a printed circuit board. They provide continuous pressure to a heatsink to improve the conductivity. For an alternative to screw mounting and clip mounting, adhesive tape allows a double-sided high bond-strength attachment.

Why use heatsink mounting accessories?

Heatsink mounting accessories provide greater reliability within your cooling system and ensure it can operate to its best ability. The right accessories can also contribute to reduced energy use and lower costs.


...
Read more Read less

Filters

Viewing 1 - 20 of 63 products
Results per page
Description Price Accessory Type For Use With
RS Stock No. 477-4878
Mfr. Part No.BP100-0.005-00-00-25
BrandBergquist
€1.154
Each (In a Pack of 10)
units
Adhesive Tape Heatsink
RS Stock No. 774-2758
Mfr. Part No.KL 35 100
€5.07
Each
units
Clip DIN Rail
RS Stock No. 485-8897
BrandRS PRO
€1.06
Each (In a Pack of 5)
units
Gull Wing Clip TO-220
RS Stock No. 298-500
BrandRS PRO
€2.06
Each
units
Transistor Mount Kit SOT-93, TO-126, TO-128, TO-202, TO-220, TO-3P
RS Stock No. 750-0964
Mfr. Part No.Hook 1
€3.16
1 Bag of 20
Bag(s)
Hook Solder Anchor BGA
RS Stock No. 263-239
BrandRS PRO
€1.64
1 Kit
Kit(s)
Transistor Mount Kit TO-3
RS Stock No. 893-5402
Mfr. Part No.CP4A-114C-108E
BrandOhmite
€71.58
Each
units
Heatsink Four Pass Cold Plate SOT-227 Package Resistor, TA1K0 Ohmite Resistor, TA2K0 Ohmite Resistor, TAP600 Ohmite Resistor, TAP800 Ohmite Resistor
RS Stock No. 362-9705
Mfr. Part No.PISTOLET FILLER
BrandBergquist
€227.30
Each
units
Gap Filler Dispenser Gun Insulators
RS Stock No. 707-4819
BrandRS PRO
€16.30
Each
units
Thermal Interface Tape Heatsink
RS Stock No. 754-5954
Mfr. Part No.HSR-2
BrandRichco
€5.36
1 Bag of 20
Bag(s)
Spring Mount Rivet Heatsink
RS Stock No. 504-0609
Mfr. Part No.THFM2
€0.367
Each (In a Pack of 10)
units
Retaining Spring TO-218, TO-220, TO-247, TO-264
RS Stock No. 754-5945
Mfr. Part No.HSR-1
BrandRichco
€7.31
1 Bag of 20
Bag(s)
Spring Mount Rivet Heatsink
RS Stock No. 362-9711
Mfr. Part No.MIXING NOZZLE 50CC
BrandBergquist
€5.28
Each
units
Gap Filler Mixing Nozzle Insulators
RS Stock No. 329-3283
Mfr. Part No.HF105-0.005-00-1212
BrandBergquist
€57.06
Each
units
Hi-Flow Insulator Heatsink
RS Stock No. 507-5829
Mfr. Part No.5901G
€0.264
Each (In a Pack of 25)
units
Clip TO-218, TO-220, TO-247
RS Stock No. 504-0592
Mfr. Part No.THFM1
€0.215
Each (In a Pack of 10)
units
Retaining Spring TO-218, TO-220, TO-247, TO-264
RS Stock No. 329-3299
Mfr. Part No.HF625-0.005-00-1212
BrandBergquist
€88.55
Each
units
Hi-Flow Insulator Heatsink
RS Stock No. 218-2283
Mfr. Part No.KL195CLIP
BrandSchaffner
€0.445
Each (In a Lot of 10)
units
Clip KL-195 Heat sink
RS Stock No. 893-5614
Mfr. Part No.CLA-T264-21
BrandOhmite
€1.195
Each (In a Pack of 50)
units
Clip TO-264 Heat Sink
RS Stock No. 403-207
Mfr. Part No.5901G
€0.173
Each (In a Pack of 10)
units
Clip TO-218, TO-220, TO-247
Related Products
Anodised heatsinks with tin-plated plugs, which allow them ...
Description:
Anodised heatsinks with tin-plated plugs, which allow them to be punched onto the PCB.Designed for vertically mounting transistors in SOT-32 or TO-220 plastic housings.Receptacles available with stock number 218-2283.
Bond-Ply 100 is thermally conductive, double-sided pressure sensitive ...
Description:
Bond-Ply 100 is thermally conductive, double-sided pressure sensitive adhesive tape. It is designed to attain high bond strength with long term exposure to moderate heat and high humidity. Can be used instead of Heat Cure Adhesives, Screw Mounting, Clip Mounting. ...
TALON™ Clips are a new way of mounting ...
Description:
TALON™ Clips are a new way of mounting and fixing Malico BGA heatsinks. Heatsinks easily snap into place and self-align with no need for additional holes or mounting. Firm and uniform mount that is resilient to vibration and minor impacts ...
Offer very high elasticity. Be easy to assemble ...
Description:
Offer very high elasticity. Be easy to assemble during manufacture. Be easy to disassemble and re-assemble during operating life. In most cases, offer high levels of resistance against corrosion. Provide exactly the right pressure on the component according to the ...