Indicator Lampholders

Indicator lampholders are support indicator lights within a lighting fixture and link them to the electrical circuit. These holders or sockets hold the bulbs and enable electrical contact to provide the bulbs with power to switch on, switch off or flash at pre-determined intervals. They also allow the lights to be easily removed, switched out or replaced.


What are indicator lampholders used for?

Indicator lampholders are most commonly found within the automotive industry, where they are used to secure the bulbs of brake lights, turning signal lights, warning gauge lights and ignition status lights.

In the industrial and manufacturing sectors, indicator lampholders are used with equipment or machinery status indicator or warning lights. They are an integral part of the safety and emergency measures within plants and factories.

Types of indicator lampholders

Indicator lampholders are categorised in terms of their different attributes, including:

  • Mounting types, such as PCB (printed circuit board) or panel mount.
  • Termination types, such as soldered, wire lead or screwed.
  • Base formats, such as bayonet, screw in, candelabra or wedged.

...
Read more Read less

Filters

Viewing 1 - 20 of 112 products
Results per page
Description Price Lampholder Type Lamp Type Lamp Base Termination Type Diameter Length Lamp Size Panel Hole Diameter Panel Thickness Mounting Type Power Rating Series Voltage Rating
RS Stock No. 589-783
BrandRS PRO
€1.36
Each (In a Pack of 5)
units
Panel Mount - BA9 - 17.7mm 19 mm - 14.5mm - Panel Mount - PE12 150 V
RS Stock No. 589-777
BrandRS PRO
€1.074
Each (In a Pack of 5)
units
Panel Mount - E10 - 17.7mm 13.25 mm - 14.5mm - Panel Mount - PE12 150 V
RS Stock No. 438-9515
BrandRS PRO
€4.05
Each
units
- - BA9 Solder Tag 10.3mm 20 mm - - - - - - -
RS Stock No. 811-715
BrandRS PRO
€1.066
Each (In a Pack of 5)
units
PCB Mount - Wedge Solder Tag 5mm 14 mm T1 - 1.5mm - - - -
RS Stock No. 206-536
BrandRS PRO
€0.426
Each (In a Pack of 5)
units
- LED BA9s, E10 - 10mm 42 mm 10 mm - - - - - -
RS Stock No. 811-642
BrandRS PRO
€0.702
Each (In a Pack of 5)
units
PCB Mount - Wedge PCB Pin 10mm 14.5 mm T3 1/4 - - - - - -
RS Stock No. 811-664
BrandRS PRO
€0.866
Each (In a Pack of 5)
units
PCB Mount - Wedge - - 12 mm - - - - - - -
RS Stock No. 210-793
BrandRS PRO
€0.544
Each (In a Pack of 5)
units
- LED - - 11mm 21 mm - - - - - - -
RS Stock No. 171-2603
Mfr. Part No.OR1208
BrandOrbitec
€2.454
Each (In a Box of 10)
units
- - E10 - - - - - - Screw Mount - 0668 -
RS Stock No. 565-147
Mfr. Part No.T0063AOFAD
€3.41
Each
units
Panel Mount - - Tabbed 14.7mm - - 12.7mm 9.6mm - - - -
RS Stock No. 237-0474
Mfr. Part No.A104700AAA
€2.28
Each
units
Panel Mount LED - Wire Leads 7.6mm 13.9 mm 3 mm 6.3mm 6.3mm - - - -
RS Stock No. 387-5396
Mfr. Part No.DTMU/MES/4
BrandTranilamp
€6.53
Each
units
Panel Mount - E10 Cable Clamp 35mm 50 mm - - - Panel Mount - DTMU -
RS Stock No. 565-153
Mfr. Part No.T0063AOFAA
€3.41
Each
units
Panel Mount - - Tabbed 14.7mm - - 12.7mm 9.6mm - - - -
RS Stock No. 141-4006
Mfr. Part No.44-10062-0313
BrandVogt
€0.77
Each
units
PCB Mount - E10 - - - - - - - - - -
RS Stock No. 171-2596
Mfr. Part No.OR1206
BrandOrbitec
€0.781
Each (In a Pack of 10)
units
PCB Mount - BA9s PCB Pin - - - - - PCB Mount - 0664 -
RS Stock No. 561-707
Mfr. Part No.TMU/240/4
BrandTranilamp
€14.26
Each
units
Panel Mount - Screw In Cable Clamp 35mm 62 mm - - - Panel Mount - TMU -
RS Stock No. 387-5419
Mfr. Part No.TMU/24/4
BrandTranilamp
€12.38
Each
units
Panel Mount - Screw In Cable Clamp 35mm 62 mm - - - Panel Mount - TMU -
RS Stock No. 336-104
Mfr. Part No.2967-6G
€0.73
Each (In a Pack of 5)
units
PCB Mount LED Wedge Wire Leads 10mm 17.2 mm T1 1/2 10.1mm 1.6mm - - - -
RS Stock No. 715-4044
Mfr. Part No.2948-6G
€0.992
Each (In a Pack of 5)
units
- - - - 11.5mm - - - - - - - -
RS Stock No. 705-9920
Mfr. Part No.2910F-42
€0.439
Each (In a Pack of 10)
units
- - - - - - - - - - - - -
Related Products
Designed to accept either LED or incandescent BA9s ...
Description:
Designed to accept either LED or incandescent BA9s bulbs Recognised under the component program of ULSupplied with O-ring to enhance water sealing capabilities Nickel plated brass body Electrical connections via solder tags Operating voltage 6 to 120Vac/dc (dependent on chosen ...
The L6 series of pushbutton and pilot lights ...
Description:
The L6 series of pushbutton and pilot lights from Idec The range consists of both standard and oversize heads; the larger buttons are ideal for gloved personnel and provide an alternative to 22mm pushbuttons if 10A contacts are not needed.Models ...
The TW series from Idec features a traditional ...
Description:
The TW series from Idec features a traditional NEMA style switch Modular construction with Snap-on contacts allows for great flexibility in configuration. Models include illuminated or non-illuminated pushbuttons, pilot lights, selectors, key switches and emergency stop switches. Corrosion resistant octagonal ...
Chromed bezel lampholders, available with flat or domed ...
Description:
Chromed bezel lampholders, available with flat or domed lens Rear access to lamp. Ratings: Max. voltage between contacts, 150V; max. voltage between contacts and case 500V; max. Compatible with all our transformer indicator lampholdersØ28.5mm & 31.5mm chromed brass bezel5mm max. ...