Indicator Lampholders

Indicator lampholders are support indicator lights within a lighting fixture and link them to the electrical circuit. These holders or sockets hold the bulbs and enable electrical contact to provide the bulbs with power to switch on, switch off or flash at pre-determined intervals. They also allow the lights to be easily removed, switched out or replaced.


What are indicator lampholders used for?

Indicator lampholders are most commonly found within the automotive industry, where they are used to secure the bulbs of brake lights, turning signal lights, warning gauge lights and ignition status lights.

In the industrial and manufacturing sectors, indicator lampholders are used with equipment or machinery status indicator or warning lights. They are an integral part of the safety and emergency measures within plants and factories.

Types of indicator lampholders

Indicator lampholders are categorised in terms of their different attributes, including:

  • Mounting types, such as PCB (printed circuit board) or panel mount.
  • Termination types, such as soldered, wire lead or screwed.
  • Base formats, such as bayonet, screw in, candelabra or wedged.

...
Read more Read less

Filters

Viewing 41 - 60 of 113 products
Results per page
Description Price Lampholder Type Lamp Type Lamp Base Termination Type Diameter Length Lamp Size Panel Hole Diameter Panel Thickness Mounting Type Power Rating Series Voltage Rating
RS Stock No. 890-4792
Mfr. Part No.080-4001-05-303
BrandDialight
€30.73
Each
units
- - Candelabra Screw Solder 25.4mm 50.8 mm S6 - - Panel Mount 75W 080 6 → 250 V
RS Stock No. 872-2846
Mfr. Part No.704.633.1
BrandEAO
€4.804
Each (In a Pack of 5)
units
- - - Screw - - - 22.5mm - Panel Mount - 704 -
RS Stock No. 890-4907
Mfr. Part No.103-3101-05-103
BrandDialight
€24.17
Each
units
- - Candelabra Screw Screw - 47.6 mm S6 - - Panel Mount - 103 6 → 250 V
RS Stock No. 890-4828
Mfr. Part No.081-1059-01-303
BrandDialight
€10.77
Each
units
- - Miniature Bayonet Solder 20.6mm 33.3 mm T3 1/4 - - Panel Mount 75W 081 2 → 120 V
RS Stock No. 890-4834
Mfr. Part No.095-0408-09-341
BrandDialight
€16.41
Each
units
- - Miniature Bayonet Solder 20.6mm 42.9 mm T3 1/4 - - Panel Mount 75W 095 105 → 125 V ac/dc
RS Stock No. 890-4916
Mfr. Part No.103-3502-05-103
BrandDialight
€23.91
Each
units
- - Candelabra Screw Screw - 47.6 mm S6 - - Panel Mount - 103 24 → 250 V
RS Stock No. 565-131
Mfr. Part No.T0063AOFAE
€3.41
Each
units
Panel Mount - - Tabbed 14.7mm - - 12.7mm 9.6mm - - - -
RS Stock No. 565-125
Mfr. Part No.T0063AOFAC
€3.41
Each
units
Panel Mount - - Tabbed 14.7mm - - 12.7mm 9.6mm - - - -
RS Stock No. 890-4758
Mfr. Part No.070-1310-11-205
BrandDialight
€25.27
Each
units
- - Miniature Bayonet Screw 14.3mm 43.3 mm T3 1/4 - - Panel Mount 75W 070 125 V
RS Stock No. 890-6782
Mfr. Part No.508-7545-504
BrandDialight
€10.77
Each
units
Datalamp Holder - - Solder Cup 7.9mm 23.4 mm - - - Panel Mount - 508 -
RS Stock No. 237-0525
Mfr. Part No.A1048OAAAC
€1.82
Each
units
Panel Mount LED Screw In Wire Leads 9.5mm 15.5 mm 5 mm 8mm 5.5mm - - - -
RS Stock No. 585-898
Mfr. Part No.MTMU/240/4
BrandTranilamp
€24.03
Each
units
Panel Mount - E10 Cable Clamp 35mm 67 mm - - - Panel Mount - MTMU 240 V
RS Stock No. 890-6785
Mfr. Part No.508-8738-504
BrandDialight
€9.76
Each
units
Datalamp Holder - - Turret 7.9mm 21.5 mm - - - Panel Mount - 508 -
RS Stock No. 890-4929
Mfr. Part No.124-0410-01-103
BrandDialight
€35.01
Each
units
- - Miniature Bayonet Solder 17.5mm 40.5 mm T3 1/4 - - Panel Mount - 124 -
RS Stock No. 890-4843
Mfr. Part No.095-1310-09-301
BrandDialight
€10.67
Each
units
- - Miniature Bayonet Screw 20.6mm 42.9 mm T3 1/4 - - Panel Mount 75W 095 125 V
RS Stock No. 890-4862
Mfr. Part No.101-3830-09-201
BrandDialight
€10.26
Each
units
- - Midget Flange Solder - 21.4 mm T1 3/4 - - Panel Mount - 101 1.35 → 28 V
RS Stock No. 213-4846
Mfr. Part No.877000KA100000
BrandSloan
€24.03
Each
units
Panel Mount LED Wedge - 11.2mm - - - - - - - -
RS Stock No. 890-5174
Mfr. Part No.250-7538-14-504
BrandDialight
€8.37
Each
units
Datalamp Holder - - Solder Cup 7.9mm 31 mm - - - Panel Mount - 250 -
RS Stock No. 890-4837
Mfr. Part No.081-1310-01-303
BrandDialight
€11.52
Each
units
- - Miniature Bayonet Screw - 46 mm T3 1/4 - - Panel Mount 75W 081 2 → 120 V
RS Stock No. 890-4701
Mfr. Part No.021-2900-300
BrandDialight
€11.79
Each
units
- - Miniature Bayonet - 17.9mm 30.5 mm T3 1/4 - - Panel Mount 75W 021 125 V
Related Products
Supplied complete with adaptors to enable either T1 ...
Description:
Supplied complete with adaptors to enable either T1 LES or T1 Miniature Flange lamp to be used,White glass-loaded nylon body.,Polycarbonate lens provides a uniformly illuminated area. The chrome-plated bezel is connected to one side of the lamp but is fully ...
Transformer lampholders designed to provide an output for ...
Description:
Transformer lampholders designed to provide an output for a 6 V MES filament lamp which is isolated from the mains supply This ensures greater safety/longer life than a mains filament lamp and superior illumination to a neon lamp.,These units are ...
Panel mounting LED holders for two lead 3mm ...
Description:
Panel mounting LED holders for two lead 3mm and 5mm LEDs These brass LED holders have a chrome, black or white anodised finish. LEDs are held in place by a push-fit nylon base for 3mm types or a screw-in nylon ...
Designed to accept either LED or incandescent BA9s ...
Description:
Designed to accept either LED or incandescent BA9s bulbs Recognised under the component program of ULSupplied with O-ring to enhance water sealing capabilities Nickel plated brass body Electrical connections via solder tags Operating voltage 6 to 120Vac/dc (dependent on chosen ...