Indicator Lampholders

Indicator lampholders are support indicator lights within a lighting fixture and link them to the electrical circuit. These holders or sockets hold the bulbs and enable electrical contact to provide the bulbs with power to switch on, switch off or flash at pre-determined intervals. They also allow the lights to be easily removed, switched out or replaced.


What are indicator lampholders used for?

Indicator lampholders are most commonly found within the automotive industry, where they are used to secure the bulbs of brake lights, turning signal lights, warning gauge lights and ignition status lights.

In the industrial and manufacturing sectors, indicator lampholders are used with equipment or machinery status indicator or warning lights. They are an integral part of the safety and emergency measures within plants and factories.

Types of indicator lampholders

Indicator lampholders are categorised in terms of their different attributes, including:

  • Mounting types, such as PCB (printed circuit board) or panel mount.
  • Termination types, such as soldered, wire lead or screwed.
  • Base formats, such as bayonet, screw in, candelabra or wedged.

...
Read more Read less

Filters

Viewing 61 - 80 of 114 products
Results per page
Description Price Lampholder Type Lamp Type Lamp Base Termination Type Diameter Length Lamp Size Panel Hole Diameter Panel Thickness Mounting Type Power Rating Series Voltage Rating
RS Stock No. 890-5180
Mfr. Part No.250-8758-33-504
BrandDialight
€23.22
Each
units
Datalamp Holder - - Turret 7.9mm 43.3 mm - - - Panel Mount - 250 -
RS Stock No. 585-898
Mfr. Part No.MTMU/240/4
BrandTranilamp
€24.03
Each
units
Panel Mount - E10 Cable Clamp 35mm 67 mm - - - Panel Mount - MTMU 240 V
RS Stock No. 842-2824
Mfr. Part No.SOP-E12-150SS
BrandBanner
€27.85
Each
units
- LED - - - 150 mm - - - - - - -
RS Stock No. 890-4792
Mfr. Part No.080-4001-05-303
BrandDialight
€30.73
Each
units
- - Candelabra Screw Solder 25.4mm 50.8 mm S6 - - Panel Mount 75W 080 6 → 250 V
RS Stock No. 890-4828
Mfr. Part No.081-1059-01-303
BrandDialight
€10.77
Each
units
- - Miniature Bayonet Solder 20.6mm 33.3 mm T3 1/4 - - Panel Mount 75W 081 2 → 120 V
RS Stock No. 890-5183
Mfr. Part No.250-8738-14-504
BrandDialight
€7.79
Each
units
Datalamp Holder - - Turret 7.9mm 31 mm - - - Panel Mount - 250 -
RS Stock No. 890-4969
Mfr. Part No.125-1310-11-103
BrandDialight
€18.48
Each
units
- - Miniature Bayonet Screw 15.9mm 31.4 mm T1 3/4 - - Panel Mount - 125 2 → 120 V
RS Stock No. 890-4701
Mfr. Part No.021-2900-300
BrandDialight
€11.79
Each
units
- - Miniature Bayonet - 17.9mm 30.5 mm T3 1/4 - - Panel Mount 75W 021 125 V
RS Stock No. 565-125
Mfr. Part No.T0063AOFAC
€3.41
Each
units
Panel Mount - - Tabbed 14.7mm - - 12.7mm 9.6mm - - - -
RS Stock No. 890-4733
Mfr. Part No.051-0901-01-301
BrandDialight
€27.426
Each (In a Pack of 41)
units
- - Candelabra Screw Screw 25.4mm 53.2 mm S6 - - Panel Mount - 051 6 → 250 V
RS Stock No. 335-971
Mfr. Part No.2919
€0.79
Each (In a Pack of 5)
units
PCB Mount LED Wedge Solder Tab 20mm 16.5 mm T3 1/4 16mm 1.6mm - - - -
RS Stock No. 835-7644
Mfr. Part No.APW-199
BrandIdec
€14.77
Each
units
Panel Mount LED - Screw 29mm 41.5 mm - 22.3mm 1 → 6mm - - - -
RS Stock No. 903-9319
Mfr. Part No.14-031.006
BrandEAO
€13.39
Each
units
Panel Mount - T5.5 Quick Connect, Solder 30mm 43.5 mm - 22.5mm - Panel Mount - 14 Series -
RS Stock No. 890-5228
Mfr. Part No.370-8738-504
BrandDialight
€12.37
Each
units
Datalamp Holder - - Turret - - - - - Panel Mount - 370 -
RS Stock No. 890-4929
Mfr. Part No.124-0410-01-103
BrandDialight
€35.01
Each
units
- - Miniature Bayonet Solder 17.5mm 40.5 mm T3 1/4 - - Panel Mount - 124 -
RS Stock No. 890-4761
Mfr. Part No.080-0532-303
BrandDialight
€8.78
Each
units
- - - - 28.95mm 23.68 mm S6 - - Panel Mount - 080 -
RS Stock No. 890-5212
Mfr. Part No.359-8430-09-502
BrandDialight
€6.99
Each
units
- - Midget Flange Solder - 20.2 mm T1 3/4 - - Panel Mount - 359 -
RS Stock No. 237-0547
Mfr. Part No.A105000AAB
€2.04
Each
units
Panel Mount LED Screw In Wire Leads 10mm 16.9 mm 5 mm 8mm 7mm - - - -
RS Stock No. 387-5380
Mfr. Part No.LMU/MES/4
BrandTranilamp
€4.50
Each
units
Panel Mount - E10 Cable Clamp 35mm 42 mm - - - Panel Mount - LMU -
RS Stock No. 890-4789
Mfr. Part No.080-1310-05-301
BrandDialight
€29.89
Each
units
- - Miniature Bayonet Screw 25.4mm 35.7 mm T3 1/4 - - Panel Mount - 080 2 → 120 V
Related Products
Multi-chip LEDs are semi-conducting alternatives to incandescent filament ...
Description:
Multi-chip LEDs are semi-conducting alternatives to incandescent filament lamps Construction consists of standard filament lamp bases incorporating a current limiting resistor and a cluster of LED chips bonded onto a substrate. Multi-chip LEDs have many advantages over standard filament lamps. ...
Panel mounting LED holders for two lead 3mm ...
Description:
Panel mounting LED holders for two lead 3mm and 5mm LEDs These brass LED holders have a chrome, black or white anodised finish. LEDs are held in place by a push-fit nylon base for 3mm types or a screw-in nylon ...
Chromed bezel lampholders, available with flat or domed ...
Description:
Chromed bezel lampholders, available with flat or domed lens Rear access to lamp. Ratings: Max. voltage between contacts, 150V; max. voltage between contacts and case 500V; max. Compatible with all our transformer indicator lampholdersØ28.5mm & 31.5mm chromed brass bezel5mm max. ...
Range of illuminated panel-mounted switches available in square, ...
Description:
Range of illuminated panel-mounted switches available in square, rectangular and circular momentary or latching versions Square or rectangular lamp terminals are also available. Suitable lamps: T5·5, see the Optoelectronics / Indicators section. Panel mounting switches in modular format Separate Lenses, ...