Multibus II Boards

Filters

Viewing 1 - 3 of 3 products
Results per page
Description Price Number of Sides Dimensions Hole Layout Length Width Base Material Connection Copper Thickness Hole Diameter Hole Pitch Thickness
RS Stock No. 527-9295
Mfr. Part No.RE333-LF
€39.45
Each
units
2 233.4 x 220 x 1.5mm 79 x 80 233.4mm 220mm Epoxy Glass Fabric Laminate DIN 41612 35µm 1mm 2.54 x 2.54mm 1.5mm
RS Stock No. 527-9302
Mfr. Part No.RE331-LF
€22.28
Each
units
1 220 x 100 x 1.5mm 32 x 81 220mm 100mm Epoxy Glass Fabric Laminate DIN 41612 35µm 1mm 2.54 x 2.54mm 1.5mm
RS Stock No. 528-0330
Mfr. Part No.RE332-LF
€20.42
Each
units
2 220 x 100 x 1.5mm 32 x 81 220mm 100mm Epoxy Glass Fabric Laminate DIN 41612 35µm 1mm 2.54 x 2.54mm 1.5mm
Related Products
Adaption circuit board for SOT23-10Epoxy fibre-glass FR4 1.50 ...
Description:
Adaption circuit board for SOT23-10Epoxy fibre-glass FR4 1.50 mm. Double-sided 35 μm Cu. Plated through holes (PTH)Surface chem. Ni/Au. Solder stop mask. Hole spacing 2.54 mm.
Adapter for SMD Components 0805, 0603 and 0402Epoxy ...
Description:
Adapter for SMD Components 0805, 0603 and 0402Epoxy fibre-glass FR4 1.50 mm. Double-sided 35 μm Cu. Plated through holes (PTH)Surface chem. Ni/Au. Solder stop mask. Solder pads for up to 8 components each side. Hole spacing 2.54 mm.
The double-sided microboards are designed for microprocessor applications ...
Description:
The double-sided microboards are designed for microprocessor applications where compatibility, flexibility, high density and screening are of prime importance. VCC rails and a VCC bus are provided but not connected, so that individual rails may be committed as required. 64//96-way ...
Completely drilled boards, designed for the development of ...
Description:
Completely drilled boards, designed for the development of prototypes of analogue circuits.Thanks to the use of APW plugs, these cards are very versatile and allow discreet components to be connected wire-to-wire, or enable plugs and wrap pins to be fitted. ...