Washroom Water Heaters

Washroom water heaters typically come in two varieties: storage water heaters and tankless water heaters. Storage water heaters store and repeatedly heat water within a tank, while tankless water heaters instantly heat water as it flows through the device, and do not retain any water internally except for what is in the heat exchanger coil. They are typically used to provide heated water for sinks and shower heads.

How do washroom water heaters work?

With traditional storage water heaters, once the water stored inside the tank has been heated, it may be streamed until it is depleted, at which point the new supply of water must be heated. Washroom water heaters tend to have a smaller tank than a typical boiler.

Tankless water heaters are typically installed near their point of use. Unlike storage water heaters, these devices offer a plentiful continuous flow of hot water and potential energy savings thanks to their greater efficiency.

Types of washroom water heaters

Certain models of washroom water heaters are intended to be installed in specific locations, such as under sinks. Many, but not all, feature a component for temperature control such as a knob.


...
Read more Read less

Filters

Viewing 1 - 13 of 13 products
Results per page
Description Price Water Capacity Power Rating Supply Voltage Connection Maximum Working Pressure Thread Size Thread Standard Maximum Operating Temperature Product Depth Product Height Type
RS Stock No. 124-3837
Mfr. Part No.CB6
BrandRedring
€86.88
Each
units
6L 1.5kW - 1/2 in BSP Male 8 bar - BSP - 255mm 270mm -
RS Stock No. 124-3838
Mfr. Part No.TS10
BrandRedring
€120.98
Each
units
10L 2kW - 1/2 in G 6 bar 1/2in G +70°C 250mm 410mm Unvented Water Storage Heater
RS Stock No. 124-1514
Mfr. Part No.EW10
BrandRedring
€186.25
Each
units
10L 3kW 240 V 1/2 in BSP 12 bar 1/2in BSP +70°C 254mm 360mm Unvented Water Storage Heater
RS Stock No. 124-1513
Mfr. Part No.MW15
BrandRedring
€431.25
Each
units
15L 3kW 240 V 1/2 in BSP 12 bar 1/2in BSP +70°C 300mm 360mm Unvented Water Storage Heater
RS Stock No. 875-0264
Mfr. Part No.I3VS
BrandRedring
€91.08
Each
units
- 3kW - - 7 bar - - - 83.5mm 228.5mm -
RS Stock No. 124-1515
Mfr. Part No.EW15
BrandRedring
€248.75
Each
units
15L 3kW 240 V 1/2 in BSP 12 bar 1/2in BSP +70°C 300mm 360mm Unvented Water Storage Heater
RS Stock No. 124-3835
Mfr. Part No.RP1E Powerstream
BrandRedring
€134.91
Each
units
- 9.5kW - - 10 bar - - - 84mm 160mm Unvented Water Storage Heater
RS Stock No. 124-3836
Mfr. Part No.RP10.8E Powerstream
BrandRedring
€138.75
Each
units
- 10.8kW - - 10 bar - - - 84mm 160mm Unvented Water Storage Heater
RS Stock No. 124-3839
Mfr. Part No.TS15
BrandRedring
€130.45
Each
units
15L 2kW - 1/2 in G 6 bar 1/2in G +70°C 310mm 410mm Unvented Water Storage Heater
RS Stock No. 124-1512
Mfr. Part No.MW10
BrandRedring
€373.75
Each
units
10L 3kW 240 V 1/2 in BSP 12 bar 1/2in BSP +70°C 254mm 360mm Unvented Water Storage Heater
RS Stock No. 282-6365
Mfr. Part No.RP12 Powerstream
BrandRedring
€338.12
Each
units
- 12kW 240 V 3/8 in BSP - 3/8in BSP - - - -
RS Stock No. 273-090
Mfr. Part No.RP1 Powerstream
BrandRedring
€270.50
Each
units
- 9.5kW 240 V 3/8 in BSP 10 bar 3/8in BSP - - - -
RS Stock No. 875-0267
Mfr. Part No.43679901
BrandRedring
€171.34
Each
units
- 3kW - - 7 bar - - - 83.5mm 228.5mm -
Related Products
Industrial incoloy 825 sheathed immersion heaters for use ...
Description:
Industrial incoloy 825 sheathed immersion heaters for use in hard and aggressive water. 3 phase, 4-wire, 415V or single phase 240Vac2 1//4 in. BSP threaded brass headsHoseproof polypropylene terminal enclosure which can be rotated in any positionFitted with thermostat and ...
Over-the-side heater elements with a choice of sheath ...
Description:
Over-the-side heater elements with a choice of sheath materials for use in open vats or vessels.Primarily designed for use in water (see note). Easily wired robust and spacious terminal box with integral earthing terminal.
Suitable for direct immersion or as a source ...
Description:
Suitable for direct immersion or as a source of conducted, convected or radiant heat. They are supplied in straight lengths in an annealed condition and can be formed into complex shapes using simple bending tools. Efficient, robust and long lastingIncoloy ...
A thick walled mild steel sheathed element specially ...
Description:
A thick walled mild steel sheathed element specially rated for oil heating applications. Length 31.5in (800mm). Rated at 3kW, 240V4 position rotatable aluminium wiring enclosure2in BSP mounting thread.