Process Needle Valves

Filters

Viewing 1 - 6 of 6 products
Results per page
Description Price Connection Flow Factor Kv Body Material Maximum Working Pressure Valve Orientation
RS Stock No. 432-5195
Mfr. Part No.4A-V4LR-SS
BrandParker
€76.08
Each
units
1/4 in 0.37m³/h Stainless Steel 345 bar Inline
RS Stock No. 432-5230
Mfr. Part No.M6A-V4LR-SS
BrandParker
€79.94
Each
units
6 mm 0.32m³/h Stainless Steel 345 bar Inline
RS Stock No. 432-5246
Mfr. Part No.M10A-V6LR-SS
BrandParker
€115.08
Each
units
10 mm 0.63m³/h Stainless Steel 345 bar Inline
RS Stock No. 432-5224
Mfr. Part No.8A-V8LR-SS
BrandParker
€145.97
Each
units
1/2 in 1.05m³/h Stainless Steel 345 bar Inline
RS Stock No. 432-5218
Mfr. Part No.6A-V6LR-SS
BrandParker
€120.83
Each
units
3/8 in 0.63m³/h Stainless Steel 345 bar Inline
RS Stock No. 432-5252
Mfr. Part No.M12A-V8LR-SS
BrandParker
€112.00
Each
units
12 mm 0.96m³/h Stainless Steel 345 bar Inline
Related Products
316L stainless steel construction, fully machined from quality ...
Description:
316L stainless steel construction, fully machined from quality forgingsEPDM seals Creep resistant bearings Reinforced nylon handle Reduced risk of contamination by top and bottom seals Operating temperature -10ºC to +120°CWorking pressure 09 bar to 10 bar Polished disc.
Speedfit® valves, connectors and couplers, made from Acetal ...
Description:
Speedfit® valves, connectors and couplers, made from Acetal and suitable for hot and cold water systems operating up to 65°C May be used with 15mm copper or polyethylene pipe. Maximum working pressures are 12 bar at 20°C and 6 bar ...
A compact stainless steel non return disc check ...
Description:
A compact stainless steel non return disc check valve designed for use with steam and hot condensate These valves have a CE marking of PN25 / PN40. Connections are flanged (wafer type)Low pressure drop Simple and compact design Horizontal or ...
The 316 stainless steel sprung disc check valve ...
Description:
The 316 stainless steel sprung disc check valve is suitable for ANSI and EN flanges • Low pressure drop• Simple and compact design• Overall lengths according to DIN 3202 part 3-K4• Horizontal or vertical installation.