Hydraulic Blanking Plugs

Hydraulic blanking plugs provide a temporary or permanent way of covering holes in high-pressure hydraulic devices. By sealing holes you can help to prevent leaks and ensure the device operates properly. Depending on their material, hydraulic blanking plugs are resistant to corrosion, oil and most chemicals. They have a threaded shaft and a flat head with a washer.

What are hydraulic blanking plugs used for?

Hydraulic blanking plugs are used in high pressure fluid applications such as presses, pumps, cylinders, valves, relays, motors, transmissions and turbos. Any blow-off or fault is prevented with a visible hydraulic bite rings on the progressive ring. Stress is evenly distributed throughout which minimises concentration at the bite point.

How to choose the right hydraulic blanking plugs

Hydraulic systems work at high pressures, applying extreme load and vibration to fittings. When choosing the right hydraulic blanking plugs, the technical specifications should be carefully considered. These factors include maximum temperature and pressure, as well as material. Steel hydraulic blanking plugs have a high resistance to corrosion, and plastic plugs are solvent, oil, grease and chemical resistant.


...
Read more Read less

Filters

Viewing 21 - 34 of 34 products
Results per page
Description Price Material Finish Head Hex Type Thread Length Overall Length Thread Standard Thread Size Maximum Operating Temperature Minimum Operating Temperature Maximum Operating Pressure
RS Stock No. 914-9508
Mfr. Part No.59725
€9.42
Each
units
Aluminium Black Anodised - 11mm 41.5mm G 1/2in +100°C -30°C -
RS Stock No. 871-2269
Mfr. Part No.VSTI16x1.5EDCF
BrandParker
€5.73
Each
units
Steel Zinc Plated Hollow Hex 12mm 17mm Metric - - - 400 bar
RS Stock No. 283-3414
Mfr. Part No.58297
€5.96
1 Pack of 5
Pack(s)
Glass Fibre Reinforced Plastic (GRP) Matte - 11mm 18mm G 1/2in +130°C -30°C -
RS Stock No. 727-777
Mfr. Part No.VSTI1EDCF
BrandParker
€24.57
1 Pack of 2
Pack(s)
Steel Zinc Plated - 16mm 22.8mm G 1in +100°C -30°C 400 bar
RS Stock No. 914-9501
Mfr. Part No.59727
€11.85
Each
units
Aluminium Black Anodised - 11.5mm 44mm G 3/4in +100°C -30°C -
RS Stock No. 283-3357
Mfr. Part No.59811
€10.16
Each
units
Aluminium Matte Anodised - 11mm 18mm G 1/2in +130°C -30°C -
RS Stock No. 283-3313
Mfr. Part No.58641
€10.90
1 Pack of 5
Pack(s)
Glass Fibre Reinforced Plastic (GRP) Matte - 13mm 22mm G 1in +130°C -30°C -
RS Stock No. 286-6874
Mfr. Part No.58299
€10.28
1 Pack of 5
Pack(s)
Glass Fibre Reinforced Plastic (GRP) Matte - 13mm 22mm G 1in +130°C -30°C -
RS Stock No. 914-9491
Mfr. Part No.58413
€4.66
Each
units
Polyamide Based Technopolymer Matte Hex Plug 15mm 26mm G 1-1/2in +100°C -30°C -
RS Stock No. 871-2262
Mfr. Part No.VSTI12x1.5EDCF
BrandParker
€4.54
Each
units
Steel Zinc Plated Hollow Hex 12mm 17mm Metric - - - 400 bar
RS Stock No. 498-340
Mfr. Part No.16PNK4S
BrandParker
€39.98
1 Pack of 5
Pack(s)
Steel Yellow Chromated, Zinc Plated - - - G 1in +120°C -40°C 240 bar
RS Stock No. 914-9505
Mfr. Part No.59729
€13.02
Each
units
Aluminium Black Anodised - 11.5mm 44mm G 1in +100°C -30°C -
RS Stock No. 871-2253
Mfr. Part No.VSTI10X1EDCF
BrandParker
€3.35
Each
units
Steel Zinc Plated Hollow Hex 8mm 12mm Metric - - - 400 bar
RS Stock No. 283-3363
Mfr. Part No.59821
€15.88
Each
units
Aluminium Matte Anodised - 12mm 20mm G 3/4in +130°C -30°C -
Related Products
Female parallel thread blanking cap Manufactured from steel ...
Description:
Female parallel thread blanking cap Manufactured from steel to BS5200 with a zinc yellow chromated finish to give a high corrosion resistance (500 hours in salt spray test). All adaptors have a working temperature range -40 to +120°C (-3 to ...
Female parallel thread blanking cap Manufactured from steel ...
Description:
Female parallel thread blanking cap Manufactured from steel to BS5200 with a zinc yellow chromated finish to give a high corrosion resistance (500 hours in salt spray test). All adaptors have a working temperature range -40 to +120°C (-3 to ...
Hexagon headed male parallel thread blanking plug Manufactured ...
Description:
Hexagon headed male parallel thread blanking plug Manufactured from steel to BS5200 with a zinc chromated finish to give a high corrosion resistance (500 hours in salt spray test). All adaptors have a working temperature range -40 to +120°C (-3 ...
Blanking plugs for ports, male metric thread Manufactured ...
Description:
Blanking plugs for ports, male metric thread Manufactured from steel to BS5200 with a zinc chromated finish to give a high corrosion resistance (500 hours in salt spray test). All adaptors have a working temperature range -40 to +120°C (-3 ...