Hydraulic Flow Control Valves - CETOP Mounting

Filters

Viewing 1 - 3 of 3 products
Results per page
Description Price Manufacturer Series CETOP Mounting Connection Port Thread Number of Ports Power Supply Voltage Maximum Operating Pressure Maximum Flow Rate Minimum Operating Temperature Maximum Operating Temperature Thread Standard Thread Size
RS Stock No. 704-0320
Mfr. Part No.R933003835
€299.42
Each
units
R93 - G 1/2 6-way 12V dc 300 bar 90L/min - - G 1/2in
RS Stock No. 134-7056
Mfr. Part No.ZNS-AB01-2-S0-D1
BrandParker
€493.78
Each
units
ZNS CETOP 3 - - - 350 bar - -20°C +60°C - -
RS Stock No. 134-7057
Mfr. Part No.ZNS-AB01-5-S0-D1
BrandParker
€548.64
Each
units
ZNS CETOP 3 - - - 350 bar - -20°C +60°C - -
Related Products
These CETOP mounting flow control check valves are ...
Description:
These CETOP mounting flow control check valves are designed to start and stop the flow of hydraulic fluid Suitable for use with mineral oil (HL, HLP) to DIN 51524 and fluid types from 2.8 to 500 mm²/s viscosity. Pilot operated ...
A range of CETOP mounting flow control valves ...
Description:
A range of CETOP mounting flow control valves for limiting the flow of hydraulic fluid to actuators They operate using mineral oils (HL, HLP) to DIN 51 524 with a viscosity range of 10 to 800mm²/s. For vertical stacking assemblies ...
Valve offering simple and accurate speed control and ...
Description:
Valve offering simple and accurate speed control and flow regulation Easy to read flow graduation scale, with position locking screw Built in safety stop prevents unintentional withdrawal of the handwheel Retaining nut included to enable panel mounting Nitrile rubber seals0.5 ...
High pressure flow control valves for general purpose ...
Description:
High pressure flow control valves for general purpose use in a hydraulic systemEasy to read colour flow graduation scale and a locking screw to stabilise flow Nitrile rubber seals Temp. range -10 to +100°C0.5 bar cracking pressure.