Hydraulic Pressure Gauge Isolation Valves

Filters

Viewing 1 - 7 of 7 products
Results per page
Description Price Orientation Connection Port Thread Body Material Maximum Operating Pressure Minimum Operating Temperature Thread Gender Maximum Operating Temperature Thread Diameter Thread Standard
RS Stock No. 278-8780
BrandRS PRO
€20.94
Each
units
Angled G 1/4 Male Carbon Steel 400 bar -20°C Male +100°C 1/4 in G
RS Stock No. 278-8796
BrandRS PRO
€30.76
Each
units
In Line G 1/4 Female Carbon Steel 400 bar -20°C Female +100°C 1/4 in G
RS Stock No. 278-9086
BrandRS PRO
€32.26
Each
units
Angled G 1/4 Female Carbon Steel 400 bar -20°C Female +100°C 1/4 in G
RS Stock No. 278-8774
BrandRS PRO
€20.94
Each
units
In Line G 1/4 Male Carbon Steel 400 bar -20°C Male +100°C 1/4 in G
RS Stock No. 196-2729
Mfr. Part No.GI1414
BrandParker
€124.60
Each
units
- G 1/4 Female Cast Iron, Steel 350 bar - Female - 1/4 in G
RS Stock No. 278-8803
BrandRS PRO
€39.18
Each
units
In Line G 1/4 Female Carbon Steel 400 bar -20°C Female +100°C 1/4 in G
RS Stock No. 278-8819
BrandRS PRO
€39.87
Each
units
Angled G 1/4 Female Carbon Steel 400 bar -20°C Female +100°C 1/4 in G
Related Products
High pressure ’L’ bore three way diverter ball ...
Description:
High pressure ’L’ bore three way diverter ball valves with BSP parallel threaded connections at all ports. These valves would be included in most circuits requiring a change over option. Suitable for use with water and oil. Nitrile seals, Delrin® ...
Manufactured from steel these non-return valves are seated ...
Description:
Manufactured from steel these non-return valves are seated metal to metal by means of spring loaded ball housed in an ABS plastic guide.
Stainless steel BSP in-line check valve. Metal to ...
Description:
Stainless steel BSP in-line check valve. Metal to metal seal by means of a machined coneBSP female thread forms.
High pressure flow control valves for general purpose ...
Description:
High pressure flow control valves for general purpose use in a hydraulic system.Easy to read colour flow graduation scale and a locking screw to stabilise flow. Nitrile rubber seals. Temp. range -10 to +100°C0.5 bar cracking pressure.