Hydraulic Pressure Reducing Valves - CETOP Mounting

Filters

Viewing 1 - 6 of 6 products
Results per page
Description Price Manufacturer Series CETOP Mounting Pressure Reduction Maximum Operating Pressure Maximum Flow Rate Minimum Operating Temperature Maximum Operating Temperature
RS Stock No. 728-922
Mfr. Part No.R900483786
€278.85
Each
units
- - 75bar - 50L/min - -
RS Stock No. 134-7022
Mfr. Part No.ZDR-BR01-5-S0-D2
BrandParker
€596.90
Each
units
ZDR CETOP 3 0 350bar 350 bar - -20°C +60°C
RS Stock No. 134-7021
Mfr. Part No.ZDR-BR01-1-S0-D1
BrandParker
€596.90
Each
units
ZDR CETOP 3 0 70bar 350 bar - -20°C +60°C
RS Stock No. 134-7017
Mfr. Part No.ZDR-P01-1-S0-D1
BrandParker
€437.26
Each
units
ZDR CETOP 3 0 70bar 350 bar - -20°C +60°C
RS Stock No. 134-7028
Mfr. Part No.ZDR-BR02-5-S0-D2
BrandParker
€965.31
Each
units
ZDR CETOP 5 0 350bar 315 bar - -20°C +60°C
RS Stock No. 134-7018
Mfr. Part No.ZDR-P01-5-S0-D2
BrandParker
€485.85
Each
units
ZDR CETOP 3 0 350bar 350 bar - -20°C +60°C
Related Products
316L stainless steel construction, fully machined from quality ...
Description:
316L stainless steel construction, fully machined from quality forgingsEPDM seals Creep resistant bearings Reinforced nylon handle Reduced risk of contamination by top and bottom seals Operating temperature -10ºC to +120°CWorking pressure 09 bar to 10 bar Polished disc.
Type 514 are a new generation of ABS ...
Description:
Type 514 are a new generation of ABS diaphragm valves with solvent cement sockets from GF Piping Systems, It sets new standards regarding safety, efficiency and simplicityInstead of the commonly used four metal screws it has a central union nut ...
These components allow higher piston speeds to be ...
Description:
These components allow higher piston speeds to be achieved on the return stroke of single and double-acting cylindersCompressed air flows from the pilot valve and via the quick exhaust valve to the cylinder. The exhaust port 3 is closed at ...
To avoid noise in long runs of pipework ...
Description:
To avoid noise in long runs of pipework and equipment it is desirable to maintain the flow rate less than two litres per second Suitable for use with water or compressed air Can be installed in any position and serviced ...