Lathe Tool Holders & Inserts

Lathe tool holders are used to secure lathe tools in place during a range of processes, including facing, threading and boring. Lathes are devices used in areas like metalworking to rotate a workpiece. Tool holders usually attach to lathes through the toolpost. Though most lathes support tool holders, not all do. Check your lathe is compatible before choosing one.


What are the advantages of lathe tool holders?


Lathe tool holders are usually made from a tougher material than the tool itself, meaning they can effectively support a precision cutting implement. They also offer flexibility and extended functionality. They can control the angle of the tool, extend or retract it as necessary or be spring-loaded to deflect the tool if too much force is applied.


Why use lathe tool holders?


There are several additional ways in which lathe tool holders allow a greater range of use of tool bits.



  • They can change the angle of the tool bit.

  • They can change the level of overhang in the tool bit.

  • They can direct fluid to the work area.

  • They may deflect the tool bit away from the piece when an excessive load is added.

...
Read more Read less

Filters

Viewing 1 - 20 of 84 products
Results per page
Description Price Approach Angle Lathe Part Series For Use With Length Height
RS Stock No. 866-0565
Mfr. Part No.26-DU 2020
BrandPramet
€242.25
Each
units
- Lathe Tool Holder - - - -
RS Stock No. 866-0350
Mfr. Part No.32-DU 2532
BrandPramet
€260.50
Each
units
- Lathe Tool Holder - - - -
RS Stock No. 866-0338
Mfr. Part No.DTGNR 2020 K 16
BrandPramet
€120.94
Each
units
90° Lathe Tool Holder - - - -
RS Stock No. 866-0354
Mfr. Part No.XLCFN 2601 J 2.00
BrandPramet
€116.34
Each
units
- Lathe Tool Holder - - - -
RS Stock No. 866-0332
Mfr. Part No.S16M-SCLCR 09-A
BrandPramet
€152.70
Each
units
95° Lathe Tool Holder SCLCR/L - - -
RS Stock No. 866-0499
Mfr. Part No.TNMG 160404E-FM:T9325
BrandPramet
€99.96
1 Box of 10
Box(es)
- Lathe Insert - - 16.5mm 4.76mm
RS Stock No. 866-0363
Mfr. Part No.XLCFN 3201 M 2.00
BrandPramet
€121.35
Each
units
- Lathe Tool Holder - - - -
RS Stock No. 866-0379
Mfr. Part No.LFMX 3.1-.20SR8M2:T8330
BrandPramet
€125.93
1 Box of 10
Box(es)
- Lathe Parting Off Insert - - 3.1mm -
RS Stock No. 866-0341
Mfr. Part No.A20Q-SDQCR 11
BrandPramet
€188.99
Each
units
107° Lathe Tool Holder - - - -
RS Stock No. 866-0401
Mfr. Part No.A20Q-PWLNR 0604
BrandPramet
€218.65
Each
units
95° Lathe Tool Holder - - - -
RS Stock No. 866-0451
Mfr. Part No.DCMT 070204E-FM:T9315
BrandPramet
€78.99
1 Box of 10
Box(es)
- Lathe Insert - - 7.8mm 2.38mm
RS Stock No. 866-0372
Mfr. Part No.LFMX 4.1-.20SNM2:T8330
BrandPramet
€137.55
1 Box of 10
Box(es)
- Lathe Parting Off Insert - - 4.1mm -
RS Stock No. 136-3984
Mfr. Part No.CNMG 120408E-M:T8330
BrandPramet
€112.86
1 Pack of 10
Pack(s)
- Lathe Insert - - 12.9mm 4.76mm
RS Stock No. 866-0512
Mfr. Part No.TPMR 160304E-47:T9325
BrandPramet
€97.77
1 Box of 10
Box(es)
- Lathe Insert - - 16.5mm 3.18mm
RS Stock No. 866-0552
Mfr. Part No.DCLNR 2525 M 12
BrandPramet
€127.53
Each
units
95° Lathe Tool Holder - - - -
RS Stock No. 866-0423
Mfr. Part No.CCMT 060208E-FM:T9325
BrandPramet
€78.99
1 Box of 10
Box(es)
- Lathe Insert - - 6.4mm 2.38mm
RS Stock No. 136-3985
Mfr. Part No.CNMG 120408E-M:T9325
BrandPramet
€114.33
1 Pack of 10
Pack(s)
- Lathe Insert - - 12.9mm 4.76mm
RS Stock No. 866-0335
Mfr. Part No.SDJCR 1616 H 11
BrandPramet
€117.33
Each
units
93° Lathe Tool Holder - - - -
RS Stock No. 866-0427
Mfr. Part No.CCMT 060204E-FM:T9315
BrandPramet
€78.99
1 Box of 10
Box(es)
- Lathe Insert - - 6.4mm 2.38mm
RS Stock No. 136-8725
Mfr. Part No.TN 16ER140UN:T8030
BrandPramet
€114.84
1 Pack of 5
Pack(s)
- Lathe Insert - - - 0.137mm
Related Products
Threading inserts for productive, economic threading in mass ...
Description:
Threading inserts for productive, economic threading in mass production These carbide indexable cutter inserts are easy to use and practical for large numbers of threading profiles. Provide a better surface finish to that of thread milling tools. Available in different ...
Turning Holder for DC Style Positive Inserts For ...
Description:
Turning Holder for DC Style Positive Inserts For general external turning operations Available in left hand or right hand Positive insert for low depths of cut and finishing applications Centre scew clamp Suitable for DC..0702 inserts.
Turning Holder for WN Style Negative Inserts For ...
Description:
Turning Holder for WN Style Negative Inserts For general external turning operations Also available in left hand Insert style incorporates 6 edges for increased economy Suitable for WNM.0604 and WN..0804 Inserts.
CVD Coated Insert for general internal turning operations ...
Description:
CVD Coated Insert for general internal turning operations Positive geometry for low depths of cut and finishing applications. For use with SCAC, SCBC, SCDC, SCFC, SCLC and SCXC Holders and Bars. Excellent for machining Steel, Stainless Steel and Cast Iron ...