Busbars

Used in power distribution busbar relays are made out of aluminium, brass or copper and they are able to conduct and ground electricity to transmit power from the source of electric power to the load. They usually have a rectangular cross-section, however, bus – bar relays can come in another shape as well such as round tubes, solid round bars, or shape tubes which affect the ampacity of the product. Ampacity refers to the maximum amount of electric current a conductor can carry before showing signs of deterioration.Where would you expect to use a busbar relay? Factories Data Centres Retail Facilities Laboratories Hospitals UniversitiesBusbar relay ranges greatly in size and the size depends on the use. Common commercial and industrial busbar relay sizes range from 40 Amps to 1200 Amps. They carry a large amount of electricity so it is important to consider a support of the busbar with insulation. Why is that crucial? It can simply cause an accident while touching the busbar. For protection against this place a busbar at an elevated height so it would not be easily accessible.What types of busbar relays are there?The most common types of busbars in the industry today are: Rigid busbars: These are used in low, medium or high voltage applications. Made with aluminium rods or copper bars and they make use of porcelain to insulate them. Strain busbars: These are used in high voltage applications and are strung between the metal structures of a substation. They are held in place by suspension type insulators. Insulated phase busbars: These are used at the medium voltage and similar to the rigid busbars, they are rigid bars that are supported by insulators.

...
Read more Read less

Filters

Viewing 1 - 20 of 93 products
Results per page
Description Price Accessory Type For Use With Range Series
RS Stock No. 386-4453
Mfr. Part No.093.20
BrandFinder
€3.64
Each
units
Jumper Link 38 Series - 93 Series
RS Stock No. 329-7320
Mfr. Part No.G78-16-P2RF-E
BrandOmron
€7.38
Each
units
Bridge Bar G2R-SD, G2R-SN, G2R-SND, G2R-SNDI, G2R-SNI - -
RS Stock No. 332-5835
Mfr. Part No.2966838
€8.84
Each
units
Plug In Bridge - FBST -
RS Stock No. 400-4028
Mfr. Part No.95.18
BrandFinder
€5.63
1 Pack of 2
Pack(s)
Jumper Link 95.03 - 95.05 - 97.01 - 97.02 Sockets and 48 and 4C Series Relay Interface Modules - 95 Series
RS Stock No. 400-4034
Mfr. Part No.94.06
BrandFinder
€7.17
1 Pack of 3
Pack(s)
Jumper Link 94.02 - 94.03 - 94.04 - 96.02 Sockets. 58 and 59 Series - 94 Series
RS Stock No. 627-3406
Mfr. Part No.3030271
€18.48
1 Pack of 5
Pack(s)
Plug In Bridge - CLIPLINE FBS, FBS 10-6
RS Stock No. 332-5829
Mfr. Part No.2966692
€8.84
Each
units
Plug In Bridge - FBST -
RS Stock No. 111-3544
Mfr. Part No.PYDN-15.5-080S
BrandOmron
€3.31
Each
units
- P2RF-PU Terminal Block Sockets - -
RS Stock No. 111-3077
Mfr. Part No.PYDN-6.2-100R
BrandOmron
€3.58
Each
units
- - - -
RS Stock No. 420-366
Mfr. Part No.RT170P1 1860211-1
€1.68
Each
units
Jumper Link RT Series - -
RS Stock No. 680-4233
Mfr. Part No.ST37001
€16.83
Each
units
Jumper Bar SNR Series - -
RS Stock No. 111-3079
Mfr. Part No.PYDN-6.2-100Y
BrandOmron
€3.58
Each
units
- - - -
RS Stock No. 111-3078
Mfr. Part No.PYDN-6.2-100S
BrandOmron
€3.58
Each
units
- - - -
RS Stock No. 164-9040
Mfr. Part No.ST37001
€20.835
Each (In a Box of 10)
units
Jumper Bar SNR Series - -
RS Stock No. 469-4306
Mfr. Part No.80.063.4029.1
BrandWieland
€2.69
Each
units
Jumper Link 38 Series - -
RS Stock No. 111-3530
Mfr. Part No.PYDN-7.75-200Y
BrandOmron
€5.30
Each
units
- P2RF-PU Terminal Block Sockets, PYF-PU Terminal Block Sockets - -
RS Stock No. 111-3074
Mfr. Part No.PYDN-6.2-040R
BrandOmron
€1.45
Each
units
- - - -
RS Stock No. 111-3082
Mfr. Part No.PYDN-6.2-200Y
BrandOmron
€5.45
Each
units
- - - -
New
RS Stock No. 190-7726
Mfr. Part No.207602-5009
BrandMolex
€9.84
Each
units
- - Triton 207602
New
RS Stock No. 190-7499
Mfr. Part No.207602-5007
BrandMolex
€8.402
Each (In a Box of 100)
units
- - - 207602
Related Products
Pepperl + Fuchs SC-System signal conditioners are especially ...
Description:
Pepperl + Fuchs SC-System signal conditioners are especially designed for general purpose applications and ensure reliable process communication High-quality isolation, an extended temperature range, and an extremely compact housing design characterise the signal conditioner range. The SC-System offers powerful ...
Off-the-shelf Triton Grounding Jumpers enable the safe management ...
Description:
Off-the-shelf Triton Grounding Jumpers enable the safe management of high-power applications Ensures quality, safety and reliability Fused termination available Provides: ∼ 93% solid termination throughout compression Increased cross-sectional contact area Increased pull-out strength Offers design flexibility ...
Relays have a test button, LED indication and ...
Description:
Relays have a test button, LED indication and mechanical flag indicator fitted as standard The test button is colour coded and dual function, push to test or lift to latch. A removable marking label is fitted to each relay. The ...
The intelligent LOCC-BOX system has been designed to ...
Description:
The intelligent LOCC-BOX system has been designed to offer you a variety of settings and configurations that are suitable for a range of applications This includes-. Power on-effect for switching capacitive loads Single or multiple fault method with storage of ...