Continuity Testers

A Continuity Tester can sometimes be referred to as an "Electrical Tester", "Electrical Test Equipment", "Voltage Continuity Tester" or a "Circuit Tester". A Continuity Tester is a type of electrical testing equipment, predominantly used to test for an electrical path between two given points. If an electrical current is found, the circuit that is being tested on can be safely de-energised before being connected to any other equipment.



How do Continuity Testers work?



The test equipment holds an electrical current indicator, which sits between the two test leads and probes. Whilst performing a test, if a circuit is established and a current or voltage is found then the indicator will be activated. This indicator may be in the form a light or buzzer, alternatively there are audible Continuity Checkers that will omit a beeping noise if power or a current is found during.



What are Continuity Testers for?



A Continuity checker is used to perform a continuity test on apparatus, to determine if a connection has been made correctly or if one is apparent between two points. This tester also helps with the indication and detection of two points that are connected, that possibly shouldn't be.



RS Components supply a generous variety of Continuity Testers, brought to you from leading brands such as Catu, Martindale and of course our trusted own brand RS Pro.


...
Read more Read less

Filters

Viewing 1 - 5 of 5 products
Results per page
Description Price Test Current Visual Indicator Audible Alarm Display Type Probe Voltage Battery Life Calibrated Battery Type Power Source Weight Dimensions Height Length Maximum Operating Temperature
RS Stock No. 254-263
Mfr. Part No.TEK 404
BrandMartindale
€54.00
Each
units
5mA - Yes LED 9V - - 9V Battery 185g 150 x 64 x 30mm 30mm 150mm +40°C
RS Stock No. 810-4737
Mfr. Part No.TEK 404
BrandMartindale
€122.00
Each
units
5mA - Yes LED 9V - RSCAL 9V Battery 185g 150 x 64 x 30mm 30mm 150mm +40°C
RS Stock No. 255-604
Mfr. Part No.RSTEK402
BrandMartindale
€46.00
Each
units
50µA No Yes LED 2.2V dc - - 9V Battery 260g 50 x 64 x 30mm 30mm 50mm -
New
RS Stock No. 196-8182
Mfr. Part No.CA 6011
€382.00
Each
units
- - - LCD - - - - - - - - - -
New
RS Stock No. 196-8016
Mfr. Part No.P01299926
€299.00
Each
units
- Yes Yes LCD - 30000 measurements - 4 x AA Battery - 225 x 185 x 135mm 135mm 225mm -
Related Products
The Fluke Insulation Multimeters combine a digital insulation ...
Description:
The Fluke Insulation Multimeters combine a digital insulation tester with a full-featured, true RMS digital multimeter in a single, compact, handheld unit, which provides maximum versatility for both troubleshooting and preventative maintenance Large display with backlight Insulation test: 1587: 0.01 ...
Fluke 1507 (10 GΩ) and 1503 (2 GΩ) ...
Description:
Fluke 1507 (10 GΩ) and 1503 (2 GΩ) electrical insulation testers are compact, rugged, reliable and easy-to-use Their multiple test voltages make them instruments of choice for troubleshooting, commissioning and preventative maintenance applications. The remote probe helps save time and ...
Meggers MIT410/2 Series of insulation and continuity testers ...
Description:
Meggers MIT410/2 Series of insulation and continuity testers are designed for testing electrical installation and specialist applications where accurate, reliable and safe testing is essential Combining the latest range of measurement techniques with new instrument design to provide a state-of-the-art ...
16A BS 4343 3 pin (2P+E) socket tester ...
Description:
16A BS 4343 3 pin (2P+E) socket tester for testing 240V systems Logical green for go indication shows good wiring status - 3 green LEDs indicate good wiring status Detects 18 faulty wiring condition Continuous audible tone indicates correct wiring ...