Bearing Pullers

A bearing puller is a tool specifically designed to remove or install bearings from rotating machine shafts or from blind bearing holes. Dependant on the size of the puller, the application can vary dramatically, ranging from transmission to complicated industry machinery.


Where can a Bearing Puller be used?


One of the main uses of a bearing puller in within a car, removing a caged set of ball and tapered bearings from a rotary shaft. Different types of bearing pullers will depend on the application they are used for:


Hydraulic pullers are designed to pull any bearing, belt pulley, gear, round wheel or other tightened part used within the machinery industry. One of the main features of using a hydraulic version is that the job of removing or dismounting a bearing is much simpler, faster and safer.


Strong back pullers are used for easy insertion between bearing and shoulders on a shaft, featuring a spring operated centre point and a safety valve, minimising puller overload.


Heavy-duty jaw pullers are considered the most versatile, they offer easy and effective dismount of bearings. They offer minimal damage to a bearing, through the use of a jaw, the whole operation is of pulling a bearing is easy and safe. Jaws are commonly used in industrial and commercial environments.


Internal bearing pullers can be used for removing grooved ball bearings efficiently from shafts and cases without dismounting a bearing. This is known as a user friendly option because some gear puller sets feature an elastic retaining ring which helps keep the puller arm in position.


How Bearing Pullers work


Usually a hand powered tool or tool kit that features a handle on the turn screw, or a male hex end to match a drive socket. There are mechanical pullet sets, hydraulic puller sets, gear puller sets and standard bearing pullers available that mimic the same actions of the hand powered gear puller.


Features of a Puller Kit
  • Pullers are often made from tool grade steel, which means that they are harder than the materials that they are being used on. This ensures that they do not break when they are pulling bearings.

  • Reversible for internal or external uses

  • Two or three claw design

  • Spring loaded centre point

...
Read more Read less

Filters

Viewing 1 - 20 of 85 products
Results per page
Description Price Capacity Hydraulic Force Operation Number of Pieces Case Material For Use With Jaw Reach
RS Stock No. 247-436
Mfr. Part No.GEDORE 100-0705
BrandGedore
€123.01
1 Kit of 1
Kit(s)
10 → 50 mm - Gear 9 Plastic - -
RS Stock No. 349-7261
BrandRS PRO
€188.86
Each
units
- 8t Hydraulic 25 - - -
RS Stock No. 434-2572
BrandRS PRO
€64.13
Each
units
19 → 45 mm - Lever Press 2 - - -
RS Stock No. 434-2566
BrandRS PRO
€51.86
Each
units
50 mm - Hand 2 - - -
RS Stock No. 237-776
Mfr. Part No.GEDORE 9.00/3
BrandGedore
€191.88
1 Kit
Kit(s)
40 → 120 Spread mm 2t Lever Press 3 Plastic - -
RS Stock No. 237-754
Mfr. Part No.GEDORE 1.13/01
BrandGedore
€51.36
Each
units
60 mm - Lever Press - - - -
RS Stock No. 237-805
Mfr. Part No.GEDORE 9.00/4
BrandGedore
€264.83
1 Kit
Kit(s)
5 → 60 mm, 40 → 120 mm, 90 mm, 110 mm - Gear 4 - - -
RS Stock No. 189-538
Mfr. Part No.TMIP 7-28
BrandSKF
€458.35
1 Kit
Kit(s)
7 → 9 mm, 10 → 12 mm, 15 → 17 mm, 20 → 28 mm - Hand 6 - - -
RS Stock No. 732-4735
Mfr. Part No.TMMK 10-35
BrandSKF
€1,048.03
Each
units
10 → 35 mm - Hand - - - -
RS Stock No. 349-7249
BrandRS PRO
€101.89
Each
units
- 10t Hydraulic 8 - - -
RS Stock No. 123-0247
Mfr. Part No.10504635
BrandIrwin
€33.79
Each
units
- - - 5 - - -
RS Stock No. 124-8442
Mfr. Part No.TMBS150E
BrandSKF
€800.82
Each
units
- - Hand 14 - - -
RS Stock No. 612-5688
Mfr. Part No.TMMA 60
BrandSKF
€366.94
Each
units
36 → 150 mm - Hydraulic - - - -
RS Stock No. 237-798
Mfr. Part No.GEDORE 9.00/1
BrandGedore
€182.53
1 Kit
Kit(s)
- - Gear 3 - - -
RS Stock No. 349-7227
BrandRS PRO
€110.02
Each
units
- 10t Hydraulic - - - -
RS Stock No. 349-7255
BrandRS PRO
€156.03
Each
units
- 10t Hydraulic - - - -
RS Stock No. 845-8359
Mfr. Part No.TMMP 2X170
BrandSKF
€125.30
Each
units
170 mm 2t Hand - High Quality Carbon Steel - -
RS Stock No. 847-8243
Mfr. Part No.1656996
BrandGedore
€45.12
Each
units
50 mm - Lever Press - - - -
RS Stock No. 612-5694
Mfr. Part No.TMMD100
BrandSKF
€793.10
Each
units
10 → 100 mm - Hand 22 - - -
RS Stock No. 737-2826
Mfr. Part No.71161001
BrandSTAHLWILLE
€77.95
Each
units
- - Gear - - - -
Related Products
3 Leg puller with quick release hooks. Safe ...
Description:
3 Leg puller with quick release hooks. Safe and quick removal of pulleys, wheels, ball bearings etc. Strong drop forged pattern. Reversible hooks for internal or external pulling. Spindle can be changed for a hydraulic spindle. Maximum spread: 160mm, reach: ...
Enerpac hydraulic puller sets contain both grip puller ...
Description:
Enerpac hydraulic puller sets contain both grip puller and cross bearing puller sets making them suitable for all pulling and pushing jobs in maintenance and repair. The puller sets are manufactured from forged steel for a long service life and ...
The SKF TMHP 10E hydraulic jaw puller kit ...
Description:
The SKF TMHP 10E hydraulic jaw puller kit allows for the effortless dismounting of bearings up to 100 kN. With self locking arms, the jaw puller minimises the risk of slipping even when under load. • Hydraulic spindle with safety ...
The TMHS 100 hydraulic spindle from SKF generates ...
Description:
The TMHS 100 hydraulic spindle from SKF generates a high pulling force with only a small amount of effort. Unlike standard mechanical spindles, they can dismount bearings in in a reduced time. The cylinder, pump and spindle are fully integrated ...