Solder Pastes

Solder paste is a type of solder used when manufacturing PCBs to connect surface mount components to pads on the board. The paste is a mixture of small solder spheres with flux.
The paste initially adheres components in place because of its stickiness. You then use heat to melt the paste to form a mechanical bond and an electrical connection.
Solder paste is applied to the board by stencil printing and the components are put in place by a pick and place machine or by hand.
Why use a solder paste?
Defects in circuit-board assembly are caused due to issues in the solder-paste printing process or due to defects in the solder paste. This can give short circuits, incomplete circuits, and head on pillow defects.
How to use Solder paste
• Remove oil, grease, polishing compound and any excessive oxides from the joint. Make sure that the joint is smooth, flat and free from any burs.
• Apply the solder paste to the top joint. The paste will not fill large gaps so make sure that the pieces to be soldered actually touch.
• Apply heat to the piece away from the joint, keep the heat source moving too prevent overheating the paste.
• Once the paste flows remove the heat source

Typical Applications
Solder pastes are used in mass production of PCBs and prototype PCB assembly.

...
Read more Read less

Filters

Viewing 1 - 20 of 31 products
Results per page
Description Price Lead Free Trade Name Package Type Package Size
RS Stock No. 835-2699
Mfr. Part No.SKU-0018
€6.23
Each
units
- Electric Paint Pen 10ml
RS Stock No. 184-9985
Mfr. Part No.291264
BrandMulticore
€25.73
Each
units
- - Syringe 25g
RS Stock No. 551-693
Mfr. Part No.291337
BrandMulticore
€25.08
Each
units
- - Syringe 25g
RS Stock No. 506-4289
Mfr. Part No.653555
BrandMulticore
€84.93
Each
units
- - Tub 500g
RS Stock No. 555-232
Mfr. Part No.GEL FLUX MOB 39 - SERINGUE DE 10CC
BrandMBO
€19.65
Each
units
- - Syringe 10cm³
RS Stock No. 835-2693
Mfr. Part No.SKU-0216
€18.68
Each
units
- Electric Paint Jar 50ml
RS Stock No. 832-9775
Mfr. Part No.1817240
BrandHenkel
€74.48
Each
units
Yes Loctite HF212 SAC0307 AGS Jar 500g
RS Stock No. 506-4302
Mfr. Part No.698840
BrandMulticore
€108.90
Each
units
Yes - Tub 500g
RS Stock No. 184-9991
Mfr. Part No.291266
BrandMulticore
€45.05
Each
units
- - Syringe 75g
RS Stock No. 832-9750
Mfr. Part No.1791137
BrandHenkel
€120.09
Each
units
Yes Loctite HF212 97SC DAP Jar 500g
RS Stock No. 910-6790
Mfr. Part No.2002845
BrandHenkel
€137.28
Each
units
Yes - Jar, Semco Cartridge 500g
RS Stock No. 146-2877
Mfr. Part No.4902P-25G
€26.60
Each
units
Yes - Syringe 25g
RS Stock No. 146-6197
Mfr. Part No.SMD4300AX10
BrandCHIPQUIK
€23.86
Each
units
- - Syringe 35g
RS Stock No. 146-6198
Mfr. Part No.SMD4300SNL10
BrandCHIPQUIK
€27.74
Each
units
Yes - Syringe 35g
RS Stock No. 146-6201
Mfr. Part No.SMDLTLFP250T3
BrandCHIPQUIK
€72.92
Each
units
Yes - Jar 250g
RS Stock No. 146-6196
Mfr. Part No.SMD291SNL50T3
BrandCHIPQUIK
€19.23
Each
units
Yes - Jar 50g
RS Stock No. 832-9766
Mfr. Part No.1817229
BrandHenkel
€100.80
Each
units
Yes Loctite HF212 97SC AGS Jar 500g
RS Stock No. 146-6194
Mfr. Part No.SMD291SNL10T5
BrandCHIPQUIK
€40.44
Each
units
Yes - Syringe 35g
RS Stock No. 146-6199
Mfr. Part No.SMDLTLFP
BrandCHIPQUIK
€18.55
Each
units
Yes - Syringe 15g
RS Stock No. 146-6192
Mfr. Part No.SMD291SNL
BrandCHIPQUIK
€16.58
Each
units
Yes - Syringe 15g
Related Products
Tack Flux no clean in a 30cc syringe ...
Description:
Tack Flux no clean in a 30cc syringe w/plunger & tip Low viscosity no-clean synthetic paste flux. Has a pleasant odor. Ideal for all rework, solder, de-solder and reflow applications Non-corrosive, non-conductive, no-clean Tack flux will not run all over ...
Tack Flux no clean 5cc (for lead-free applications) ...
Description:
Tack Flux no clean 5cc (for lead-free applications) w/plunger & tip Low viscosity no-clean synthetic paste flux. Has a pleasant odor. Ideal for all rework, solder, de-solder and reflow applications Non-corrosive, non-conductive, no-clean Tack flux will not run all over ...
Solder Paste no clean 63Sn/37Pb in 5cc syringe ...
Description:
Solder Paste no clean 63Sn/37Pb in 5cc syringe 15g w/plunger & tip Printing speeds up to 100mm/sec Long stencil life Wide process window Clear residue Low voiding Excellent wetting compatibility on most board finishes Dispense grade Compatible with enclosed print ...
Solder Paste in jar 50g (T3) Sn63/Pb37 no ...
Description:
Solder Paste in jar 50g (T3) Sn63/Pb37 no clean 9025% metal. Printing speeds up to 100mm/sec Long stencil life Wide process window Clear residue Low voiding Excellent wetting compatibility on most board finishes Print grade Compatible with enclosed print heads ...