RS PRO 250 ml Liquid Acrylic Adhesive

  • RS Stock No. 144-383
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

Rigid Plastics (Acrylic) Bonding

A range of 3 versatile adhesives for the fabrication/manufacture of signs & point of sale (POP) displays when using acrylics, polycarbonates, high impact polystyrenes and PETG. The RS IGA range offers these 3 solvented adhesives in handy 250ml sizes to minimise wastage in smaller applications:

AB-1 – 1 part (single part) cement formulated to provide excellent bonding of small lap and butt joints on cast acrylics. It is also suitable for polycarbonate, high impact polystyrene and PETG and offers small gap filling qualities.

AB-2 – 2 part kit formulated to provide excellent bonding of all types of joints on the plastics mentioned above where an external exposure stronger bond is required.

AB-3 – 1 part (single part) cement formulated to provide excellent bonding of small lap and butt joints on extruded acrylics, polycarbonates, high impact polystyrenes and PETG. It will also give good results on cast acrylics. This water thin viscosity adhesive is ideal for use in by capillary action.

Pre-bond 1 – Solvent based cleaner in 250ml screw top can designed to clean & degrease the surfaces prior to bonding.

RS PRO Liquid Acrylic Adhesive

The RS PRO 250ml transparent liquid acrylic adhesive is a 1-part cement formulated bonder that provides excellent bonding of small lap and butt joints on cast acrylics. This adhesive is made of dichloromethane methylene chloride and nitroethane. It is also suitable for polycarbonate, high impact polystyrene and PETG and offers small gap-filling qualities.

Features and Benefits

• Pungent odour
• Dichloromethane Methylene Chloride, Nitroethane composition

Applications

• Acrylic
• PC
• PETG
• Polystyrene

Specifications
Attribute Value
Application Bonding
Material Compatibility Acrylic, PC, PETG, Polystyrene
Colour Transparent
Acrylic Type Acrylic
Product Form Liquid
Package Type Bottle, Syringe
Package Size 250 ml
Odour Pungent
Chemical Composition Dichloromethane Methylene Chloride, Nitroethane
2 Within 1 working day(s) (IE stock)
Within 8 working day(s) (EU stock)
Unit of sale: Each
22.69
(exc. VAT)
27.91
(inc. VAT)
units
Per unit
1 - 5
€22.69
6 - 14
€21.78
15 +
€21.33
Related Products
A 2-part, fast setting (4-5 minutes), toughened acrylic ...
Description:
A 2-part, fast setting (4-5 minutes), toughened acrylic adhesive for high strength structural bonding applications The adhesive Bonds well to Aluminium, metal, wood etc and provides a tough flexible bond line. Supplied in 50ml twin cartridge, it requires applicator gun, ...
The ITW Devcon 50ml epoxy resin is a ...
Description:
The ITW Devcon 50ml epoxy resin is a 2-part structural resin and dispensing systems which allow the metering, mixing and accurate application of epoxy and acrylic structural adhesives They ensure accurate ratio mix, fast application with a predetermined flow rate ...
Two-part structural adhesives and dispensing systems which allows ...
Description:
Two-part structural adhesives and dispensing systems which allows the metering, mixing and accurate application of epoxy and acrylic structural adhesives They ensure accurate ratio mix, fast application with a predetermined flow rate and reduced waste/mess. To apply the adhesive a ...
These waterproof plasters feature a viral barrier with ...
Description:
These waterproof plasters feature a viral barrier with skin friendly adhesive, while still remaining breathable and oxygen permeable for effective infection protection Breathable plasters impermeable to oil and fat Viral waterproof barrier Pad absorbs and protects with low adherent contact ...