Herga Air Switch Bellows

  • RS Stock No. 472-9979
  • Mfr. Part No. 6419-0020
  • Manufacturer Herga
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

Bulkhead Connector for Hand Held Actuator

Bulkhead Connector for hand held actuator

Actuators, Switch Elements, Tubing & Accessories

The air operated switch system offers enhanced safety in hazardous areas by allowing remote operation of electrical circuits.
The actuator is a bellows which, when compressed moves air down the air tubing to the switch element. This compressed air then expands a bellows in the switch, which operates the electrical contacts.
When used in wet environments or where electrical switching would be dangerous due to arcing, the switch and all electrical wiring can be located outside the hazardous area giving the operator total electrical isolation for the equipment.
Such applications include: Battery charging rooms, laboratories, garages, or wherever explosive gases, vapours or powders may exist.

When assembled the air switch and actuator form a sealed system, therefore temperature variation will cause pressure changes, which can in extreme cases affect the performance of the switch. To prevent this the total volume of the system must be kept below a critical value for a given temperature range and, to this end, a maximum length of air tubing (and hence volume) can be given for any combination of switch and actuator.
The additional data tables give these lengths in metres; for moderate and extreme temperatures.

Specifications
Attribute Value
Manufacturer Series 6419
Type Bellows
37 In stock for delivery within 2 working days
Unit of sale: Each
7.44
(exc. VAT)
9.15
(inc. VAT)
units
Per unit
1 - 4
€7.44
5 - 9
€7.15
10 +
€6.95
Related Products
D-H7 series auto switches for CG1 series air ...
Description:
D-H7 series auto switches for CG1 series air cylinder. These solid state switches are available as a PNP or NPN orientation with two colour indication and diagnostic output. Various lead wire lengths are available.
Festo SPAN series pressure sensors for monitoring compressed ...
Description:
Festo SPAN series pressure sensors for monitoring compressed air and non-corrosive gases. The measuring method is based on a piezoresistive measuring cell for relative pressure measurement. Pressure values are transmitted to the connected control system as a switching signal, as ...
Festo PEV contactless adjustable pressure switches for use ...
Description:
Festo PEV contactless adjustable pressure switches for use at variuos stages of pneumatic systems. Available as a screw mounting 1 to 12 bar gauge unit or 1 to 10 bar thereaded screw in unit. 1 to 12 bar24 V dc. ...
The 18D series pneumatic pressure switches from RS ...
Description:
The 18D series pneumatic pressure switches from RS Pro are intrinsically safe to operate and contain a microswitch with gold plated contacts.These pressure switches are ATEX approved. • Microswitch with gold plated contacts • High number of switching cycles • ...