40mm Self Aligning Ball Bearing 80mm O.D

  • RS Stock No. 506-432
  • Mfr. Part No. 1208EKTN9
  • Manufacturer SKF
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): SE
Product Details

Double Row Self - Aligning

Radial Self-Aligning Ball Bearing

These bearings are designed to accommodate shaft deflection when running and will also cope with initial misalignment. The double row bearing is designed primarily to withstand radial load with a small capacity for axial load. Also available with ring seals (rubbing seals) made from oil-resistant, non-wearing synthetic rubber with steel reinforcement on both sides (Type 2RS1).

Open Bearings

ETN9 and KTN9 are Open self-aligning bearings without a seal available in parallel or Taper bores.

Sealed bearings

2RS1TN9 are sealed (NBR) bearings packed with grease with a lithium thickener suitable for temperatures from -40°C to + 100°C. They are sealed for life, so should not be heated above 80°C before mounting and must not be washed out under any circumstances.

TN suffix denotes polyamide cage

Supplied with

instruction leaflet.

//media.rs-online.com/t_line/L285124-12.gif
Specifications
Attribute Value
Inside Diameter 40mm
Outside Diameter 80mm
Ball Bearing Type Self Aligning
Race Width 18mm
End Type Open
Number of Rows 2
Static Load Rating 6.95kN
Material Steel
Cage Material Fibreglass Reinforced PA
Race Type Plain
Dynamic Load Rating 19.9kN
Bore Type Tapered
Temporarily out of stock - back order for despatch when stock is available
Unit of sale: Each
36.49
(exc. VAT)
44.88
(inc. VAT)
units
Per unit
1 - 4
€36.49
5 - 9
€35.04
10 - 24
€34.31
25 +
€33.57
Related Products
SKF Ball Bearings are designed to deliver increased ...
Description:
SKF Ball Bearings are designed to deliver increased reliability, reduced complexity and decreased environmental impact in high operating temperaturesFeatures:• Excellent performance in hot conditions, dry environments and low rotational speed applications• Temperature range -30°C to 150°C• Suitable ...
FAG from Schaeffler double row angular contact ball ...
Description:
FAG from Schaeffler double row angular contact ball bearings are units with solid inner and outer rings and ball and cage assemblies with polyamide, sheet steel or brass cages They correspond in design to single row angular contact ball bearings ...
INA from Schaeffler angular contact ball bearings have ...
Description:
INA from Schaeffler angular contact ball bearings have a double row design and lip seals on both sides • Lower operating costs • Reduced maintenance due to improved lubrication • Lower heat generation • Less noise • Sealed.
FAG from Schaeffler deep groove ball bearings are ...
Description:
FAG from Schaeffler deep groove ball bearings are versatile, self-retaining bearings with solid outer rings, inner rings and ball and cage assemblies These products are of simple design, durable in operation and easy to maintain. They are available in single ...