17mm Self Aligning Ball Bearing 40mm O.D

  • RS Stock No. 285-1377
  • Mfr. Part No. 2203 E-2RS1TN9
  • Manufacturer SKF
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): CH
Product Details

Double Row Self - Aligning

Radial Self-Aligning Ball Bearing

These bearings are designed to accommodate shaft deflection when running and will also cope with initial misalignment. The double row bearing is designed primarily to withstand radial load with a small capacity for axial load. Also available with ring seals (rubbing seals) made from oil-resistant, non-wearing synthetic rubber with steel reinforcement on both sides (Type 2RS1).

Open Bearings

ETN9 and KTN9 are Open self-aligning bearings without a seal available in parallel or Taper bores.

Sealed bearings

2RS1TN9 are sealed (NBR) bearings packed with grease with a lithium thickener suitable for temperatures from -40°C to + 100°C. They are sealed for life, so should not be heated above 80°C before mounting and must not be washed out under any circumstances.

TN suffix denotes polyamide cage

Supplied with

instruction leaflet.

//media.rs-online.com/t_line/L285124-12.gif
//media.rs-online.com/t_line/LF285124-10.gif
Specifications
Attribute Value
Inside Diameter 17mm
Outside Diameter 40mm
Ball Bearing Type Self Aligning
Race Width 16mm
End Type Sealed
Number of Rows 2
Static Load Rating 2.2kN
Material Steel
Cage Material Fibreglass Reinforced PA
Race Type Plain
Dynamic Load Rating 8.84kN
Bore Type Parallel
12 Within 2 working day(s) (EU stock)
2 Within 2 working day(s) (EU stock)
Unit of sale: Each
40.25
(exc. VAT)
49.51
(inc. VAT)
units
Per unit
1 - 4
€40.25
5 - 9
€38.64
10 - 24
€37.83
25 +
€37.02
Related Products
Angular Contact Bearings are ideally suited to applications ...
Description:
Angular Contact Bearings are ideally suited to applications requiring high rotating speeds, combined radial and axial loads and a high degree of stiffness and running accuracy High Performance - They have a high load carrying capacity and thus allow smaller ...
SKF Ball Bearings are designed to deliver increased ...
Description:
SKF Ball Bearings are designed to deliver increased reliability, reduced complexity and decreased environmental impact in high operating temperaturesFeatures:• Excellent performance in hot conditions, dry environments and low rotational speed applications• Temperature range -30°C to 150°C• Suitable ...
The Food Line series of stainless steel deep ...
Description:
The Food Line series of stainless steel deep groove ball bearings by SKF can be used for a wide range of food and beverage applications They are corrosion resistant when exposed to moisture and several other media and can accommodate ...
INA from Schaeffler classic radial insert ball bearings ...
Description:
INA from Schaeffler classic radial insert ball bearings are located on the shaft with a locking collar They are suitable for bearing arrangements with a constant direction of rotation or, under low speed and load, for an alternating direction of ...