ACT Meter CHROME-IBT Battery Tester

  • RS Stock No. 839-9838
  • Mfr. Part No. CHROME-IBT
  • Manufacturer ACT Meter
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

ACT Meter Battery Tester

The ACT Meter chrome intelligent battery tester is designed for 12V lead-acid batteries of current capacity 1.2Ah to 200Ah. It accurately measures the available ah capacity based on the battery's temperature and state of charge. This enables you to check the voltage and test the capacity of new batteries straight from the box, as well as used batteries which may show abnormal ah capacity caused by excess temperature or from being under or overcharged. A table on the side of the meter indicates when batteries should be recharged or replaced due to ageing or operating conditions (65% of rated capacity).
Note:
A temperature-sensitive strip is located on the unit to record the ambient temperature.
Supplied with:
Act chrome intelligent battery tester
Act/3532 terminal connectors
Act/410 soft carry case
Sample act/BTL labels
Operating instructions
Certificate of calibration

Features and Benefits

Tests 12V SLA and flooded lead acid batteries
Simulates a full (20-hour) battery discharge test within seconds
Displays DC voltage and ampere-hour (Ah) capacity available in the battery
Advanced pulse load analysis accurately measures ah capacity available in seconds
Accurate ah capacity based on battery's temperature and state of charge
Reverse polarity protection
Green back-lit LCD display

Applications

Fire systems
Security systems

Certifications

CE certified

Specifications
Attribute Value
For Battery Chemistry Lead Acid
3 Within 1 working day(s) (IE stock)
9 Within 2 working day(s) (EU stock)
Unit of sale: Each
368.00
(exc. VAT)
452.64
(inc. VAT)
units
Per unit
1 +
€368.00
Related Products
The 600B Battery Capacity analyser addresses the need ...
Description:
The 600B Battery Capacity analyser addresses the need to test and maintain sealed lead acid (SLA) batteries used in backup power UPS, emergency lighting, fire alarms, security systems, and many other electrical systems By quickly characterizing a battery's response to ...
The 601B Battery Capacity analyser addresses the need ...
Description:
The 601B Battery Capacity analyser addresses the need to test and maintain sealed lead acid (SLA) batteries used in backup power UPS, emergency lighting, fire alarms, security systems, and many other electrical systems By quickly characterizing a battery's response to ...
Monitor charge of your stored power sport vehicle ...
Description:
Monitor charge of your stored power sport vehicle 12V lead-acid battery or confirm if the vehicle charging system is working correctly Active charging system monitoring: 13.5V 'acceptable' and 14V 'good' levels Industry standard SAE charge port3 LEDs display battery status ...
Opti Mate test TS126 Battery tester for all ...
Description:
Opti Mate test TS126 Battery tester for all Lead-acid and Li FePO4 / LFP Lithium batteries Connect clips to the battery and read the result Easy to follow instructions on rear panel of the tester Industry standard SAE 2-pin connector100cm ...