Gedore Bearing Puller 1656996

  • RS Stock No. 847-8243
  • Mfr. Part No. 1656996
  • Manufacturer Gedore
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
Product Details

Gedore 2 Leg External Bearing Puller

High quality External puller for the swift and clean removal of bearings.

Two arm fan puller
Hard wearing Steel construction
Spindle Size M10 x 115mm spindle size
Load capacity of 1 ton

Specifications
Attribute Value
Capacity 50 mm
Operation Lever Press
1 Within 1 working day(s) (IE stock)
21 Within 2 working day(s) (EU stock)
Unit of sale: Each
45.12
(exc. VAT)
55.50
(inc. VAT)
units
Per unit
1 +
€45.12
Related Products
A 3 piece set designed for the safe ...
Description:
A 3 piece set designed for the safe removal of tight fitting ball bearings, bearing races, bushings and shaft seals The internal extractor is inserted into the bearing and the spindle screwed in. The turned out shoulders will press outwards ...
The SKF TMBS E series of back pullers ...
Description:
The SKF TMBS E series of back pullers are easily inserted between the bearing and shoulder on the shaft They have a spring loaded centre point allowing easier puller centring and a safety valve minimising puller overload. • TMBS 100E ...
The TMSC series of internal bearing pullers provide ...
Description:
The TMSC series of internal bearing pullers provide a positive grip of the bearing by expanding the collet adapters on the rear side of the bearing bore The adapters are connected to a slide hammer which generates enough impact to ...
Bolt Grip fastener removers from Irwin Designed with ...
Description:
Bolt Grip fastener removers from Irwin Designed with a reverse spiral flute which securely grips and removes stubborn nuts and bolts. Suitable for use with a hand ratchet 3/8 in square drive and has hexagon flats for use with a ...