2 Hole Flanged Bearing, SFT25, 25mm ID

  • RS Stock No. 747-349
  • Mfr. Part No. SFT25
  • Manufacturer NSK-RHP
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
Product Details

Self-Lube Bearing Units

Two bolt flange bearing units from NSK. Made from cast iron these self lubricated units are robust and long lasting. These bearing units are easy to fit and can be removed without any breakage allowing for easy re-fitting.

Sealed bearing units to suit shaft diameters from 12mm to 40mm and from in. to 1 in.
Made from cast iron to BS1452
Spherical bearing insert accommodates initial misalignment
Nitrile/fabric seals
C3 internal radial clearance

Supplied with

Grease nipples and full fitting instructions.

//media.rs-online.com/t_line/LF747260-99.gif

Two-Bolt Flange Bearings - NSK

Specifications
Attribute Value
Material Cast Iron
Inside Diameter 25mm
Length 125.5mm
Width 70mm
Depth 28.6mm
Number of Mount Holes 2
Mount Hole Size 10 mm
Mount Hole Centre-to-Centre 99mm
14 In stock for delivery within 2 working days
Unit of sale: Each
30.99
(exc. VAT)
38.12
(inc. VAT)
units
Per unit
1 - 4
€30.99
5 - 9
€30.03
10 +
€29.05
Related Products
Two kits of iglidur® G dry bushes and ...
Description:
Two kits of iglidur® G dry bushes and thrust washers, offering cost-effective solutions for a variety of applications requiring compact, low-friction bearings iglidur® G is the 'all rounder' polymer bearing, having low friction, high wear resistance and high load capacity. ...
SKF SPEEDI-SLEEVES offer a cost-effective sealing solution when ...
Description:
SKF SPEEDI-SLEEVES offer a cost-effective sealing solution when machine shaft surfaces have been damaged or worn in operation SKF SPEEDI-SLEEVES eliminate the typical need to replace or rework damaged shafts caused by abrasion due to environmental contaminants, high pressures, speeds ...
Self-lube bearing units with two-piece zinc-plated pressed steel ...
Description:
Self-lube bearing units with two-piece zinc-plated pressed steel housings, fitted with bearing inserts Bore sizes 12 to 30mm & 1/2 in to 1 1/4 in internal diameter Quick fit/dismantle2-bolt & 3-bolt versions available, in Metric or Imperial sizes.
Plummer block housing units have a long or ...
Description:
Plummer block housing units have a long or a short base Housings with a long base are screw mounted to the adjacent construction by slots, housings with a short base by blind threaded holes. Due to the spherical outside surface ...