4 Hole Flanged Bearing, EFSM-10, 10mm ID

  • RS Stock No. 311-2752
  • Mfr. Part No. EFSM-10
  • Manufacturer Igus
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): DE
Product Details

IGUS® Maintenance Free 4 Bolt Flange Bearing

Maximum loading up to 4000N dependant on size

Note

IGUBAL® bearings are designed to run with a clearance between the shaft and the inside diameter of the ball, to prevent the ball turning in the housing.

//media.rs-online.com/t_line/L311275-02.gif

Flange Units & Pedestal / Pillow Blocks

IGUBAL® pillow block bearings are self-lubricating and require no maintenance. Designed to run dry major advantages include the bearings are extremely tolerant to dirt and dust, meaning that IGUBAL® can be used in abrasive environments.

Low weight (20% of equivalent steel)
High rigidity
Maintenance free-dry running
Corrosion and chemically resistant
High fatigue strength under changing loads
Working temperature range: -30 to +80°C

Specifications
Attribute Value
Material Iglidur W300, Igumid G
Inside Diameter 10mm
Length 38mm
Width 38mm
Depth 12mm
Number of Mount Holes 4
Mount Hole Size 5.3 mm
Mount Hole Centre-to-Centre 26mm
Temporarily out of stock - back order for despatch 31-01-2020, delivery within 2 working days
Unit of sale: Each
8.20
(exc. VAT)
10.09
(inc. VAT)
units
Per unit
1 - 4
€8.20
5 - 9
€7.96
10 +
€7.68
Related Products
Easy to install pedestal bearings compensate for alignment ...
Description:
Easy to install pedestal bearings compensate for alignment errors and avoid edge pressures The housings are manufactured from an impact resistant, rigid, thermoplastic composite material. High sliding speeds of up to 1.5m/s for rotary movements and 8m/s for linear movements ...
Suitable for use as eccentric rollers, guide rollers, ...
Description:
Suitable for use as eccentric rollers, guide rollers, rocker valve rollers, cam rollers in slideways or pressure rollers2 O-ring seals, single coated Operating temperature: -30°C to +100°C
Support rollers of the NATR design incorporate cage-guided ...
Description:
Support rollers of the NATR design incorporate cage-guided needle rollers and permit relatively high speed operation The outer ring is guided by the side washers which are pressed on to the inner ring; the washers form gap-type seals with the ...
Cam rollers are ball bearings which have a ...
Description:
Cam rollers are ball bearings which have a particularly thick-walled outer ring They are ready-to-mount pre-greased units and are used for all types of cam drives, conveyor systems etc The 3058 series with a crowned runner surface should always be ...