2 Hole Flanged Bearing, GFL-10, 10mm ID

  • RS Stock No. 311-2768
  • Mfr. Part No. GFL-10
  • Manufacturer Igus
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): DE
Product Details

IGUS® Maintenance Free 2 Bolt Plain Bearing

These very low height plain bearings can be used with rotating, oscillating and axial movements. They are maintenance free and abrasion, temperature and corrosion resistant.

E10 tolerance on inside diameter (measured with plug gauge)
Fit into a H7 bore for high load applications
Can be used with a simple punched hole for most applications
Temperatures from -40°C to +220°C (short term), 130°C (long term) possible
Maintenance free, self lubricating
Ideal in dirty dusty conditions

Note

IGUBAL® bearings are designed to run with a clearance between the shaft and the inside diameter of the ball, to prevent the ball turning in the housing.

//media.rs-online.com/t_line/L311276-01.gif
//media.rs-online.com/t_line/LD311276-01.gif
//media.rs-online.com/t_line/LD311276-02.gif

Flange Units & Pedestal / Pillow Blocks

IGUBAL® pillow block bearings are self-lubricating and require no maintenance. Designed to run dry major advantages include the bearings are extremely tolerant to dirt and dust, meaning that IGUBAL® can be used in abrasive environments.

Low weight (20% of equivalent steel)
High rigidity
Maintenance free-dry running
Corrosion and chemically resistant
High fatigue strength under changing loads
Working temperature range: -30 to +80°C

Specifications
Attribute Value
Material Iglide G300
Inside Diameter 10mm
Length 30mm
Width 15mm
Depth 6mm
Number of Mount Holes 2
Mount Hole Size 4.5 mm
Mount Hole Centre-to-Centre 22mm
95 In stock for delivery within 2 working days
Unit of sale: Each
3.85
(exc. VAT)
4.66
(inc. VAT)
units
Per unit
1 - 4
€3.85
5 - 9
€3.73
10 +
€3.61
Related Products
Easy to install pedestal bearings compensate for alignment ...
Description:
Easy to install pedestal bearings compensate for alignment errors and avoid edge pressures The housings are manufactured from an impact resistant, rigid, thermoplastic composite material. High sliding speeds of up to 1.5m/s for rotary movements and 8m/s for linear movements ...
Suitable for use as eccentric rollers, guide rollers, ...
Description:
Suitable for use as eccentric rollers, guide rollers, rocker valve rollers, cam rollers in slideways or pressure rollers Will also fit user's stud variations Crown ground outside diameter, r = 500mm Operating temperature -30°C to +100°C
Cam followers of the KR design are fitted ...
Description:
Cam followers of the KR design are fitted with needle rollers and have a thick outer ring making them suitable for shock loads Concentric cam follower The outer ring is guided via the integral flange at the head of the ...
Support rollers of the NATR design incorporate cage-guided ...
Description:
Support rollers of the NATR design incorporate cage-guided needle rollers and permit relatively high speed operation The outer ring is guided by the side washers which are pressed on to the inner ring; the washers form gap-type seals with the ...