4 Hole Flanged Bearing, FY 20 TF, 20mm ID

  • RS Stock No. 339-8631
  • Mfr. Part No. FY 20 TF
  • Manufacturer SKF
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): IT
Product Details

Cast Iron, Flange Bearing Unit

Sealed bearing units to suit metric & imperial shafts.

Made from cast iron to BS1452
Spherical bearing insert accommodates initial misalignment
Nitrile/fabric seals

Supplied with

grease nipples

//media.rs-online.com/t_line/L339861-01.gif

Four-Bolt Flange Bearings - SKF

Specifications
Attribute Value
Material Cast Iron
Inside Diameter 20mm
Length 86mm
Width 86mm
Depth 37.3mm
Number of Mount Holes 4
Mount Hole Size 11.5 mm
Mount Hole Centre-to-Centre 63.5mm
28 Within 2 working day(s) (EU stock)
26 Within 2 working day(s) (EU stock)
Unit of sale: Each
26.74
(exc. VAT)
32.36
(inc. VAT)
units
Per unit
1 - 4
€26.74
5 - 9
€25.68
10 - 24
€25.13
25 +
€24.61
Related Products
Self-lube bearing units with two-piece zinc-plated pressed steel ...
Description:
Self-lube bearing units with two-piece zinc-plated pressed steel housings, fitted with bearing inserts Bore sizes 12 to 30mm & 1/2 in to 1 1/4 in internal diameter Quick fit/dismantle2-bolt & 3-bolt versions available, in Metric or Imperial sizes.
These flanged housing units have four bolts and ...
Description:
These flanged housing units have four bolts and a centring spigot which is mounted in a turned recess into the machine structure The centring spigot gives concentric alignment of the housings and relieves the fixing screws of any radial forces. ...
INA housing units are available as plummer block, ...
Description:
INA housing units are available as plummer block, flanged and take-up housing units in numerous different designs The units are ready-to-fit and comprise INA cast iron or sheet steel housings in which INA radial insert ball bearings are fitted. In ...
Designed specifically for use in industries where frequent ...
Description:
Designed specifically for use in industries where frequent thorough wash downs are necessary, optimum hygiene standards are required and good chemical resistance is important over a wide temperature range Capable of accommodating initial misalignment whilst mounting Re-lubrication is possible through ...