Cooper Bussmann, 80A, A3, British Standard Fuse, gG, 550V ac

Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
Product Details

Eaton Bussmann Series Bolted Tag Fuse - British Standard

Eaton Bussmann Series bolted tag fuse is essentially a fuse that is fitted with brackets, these brackets allow the fuse to be bolted onto a fuse holder. Predominantly, this type of fuse is used within installations as a "weak link". They are designed to break when a fault occurs, such as an overcurrent or short circuit - they are a safety and damage measure. Cooper Bussman's fuses are commonly found within a multitude of industrial applications, electrical equipment and wiring systems

Features & Benefits

• The low-temperature rise enables the fuse to be suitable for high-density mounting applications
• Fuse links, specifically designed for the protection of applications
• Conforms to industry standards
• Low voltage fuse
• Suitable for three-phase applications
• Suitable for type 2 co-ordinated applications as defined in IEC 947-4
• Low power loss, typically 20% lower than the requirements of BS88

//media.rs-online.com/t_line/L413793-01.gif
Specifications
Attribute Value
Current Rating 80 A
Fuse Size A3
Voltage Rating 550 V ac
Fuse Standard BS 88, IEC 269
Fixing Centres 73.5mm
Application Category GG
Tag Width 12.7mm
High Rupture Capacity Yes
Overall Length 95mm
Body Diameter 21mm
Body Height 54.5mm
147 In stock for delivery within 2 working days
Unit of sale: Each
15.28
(exc. VAT)
18.79
(inc. VAT)
units
Per unit
1 - 4
€15.28
5 - 24
€12.89
25 - 49
€11.11
50 - 99
€9.93
100 +
€9.31
Related Products
As the fuse allows for the starting surge ...
Description:
As the fuse allows for the starting surge of a motor its full load current must not exceed the lesser of the dual current rating e.g. 20 M25 must not have a continuous load of greater than 20A. Breaking capacity ...
Eatons Bussmann® series fuse links are specifically designed ...
Description:
Eatons Bussmann® series fuse links are specifically designed for the protection of general industrial applications eg. power distribution, cable protection, motor Protection. Good peak let-through current limitation1:1:6 Selective coordination ratio between minor and major fusegG characteristics for cable ...
Eatons Bussmann® series fuse links, size A2, are ...
Description:
Eatons Bussmann® series fuse links, size A2, are specifically designed for the protection of general industrial applications eg. power distribution, cable protection, motor protection. Good peak let-through current limitation1:1:6 Selective coordination ratio between minor and major fusegG characteristics for ...
Fuse-link, LV, 80 A, AC 500 V 88/A3, ...
Description:
Fuse-link, LV, 80 A, AC 500 V 88/A3, 21 x 87 mm, gL/gG