Breadboard Prototyping Board 114.3 x 156.21 x 1.6mm

  • RS Stock No. 159-6192
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

DIP Breadboards

A range of low density boards designed for wiring integrated circuits.
The 0 V and Vdc power supply lines are repeated on the component side of the board, increasing the distribution capacity.
The contacts are replaced by individual pads designed to take connection plugs.

Specifications
Attribute Value
Type Prototyping Board
Length 114.3mm
Width 156.21mm
Height 1.6mm
Dimensions 114.3 x 156.21 x 1.6mm
2 In stock for delivery within 2 working days
Unit of sale: Each
62.23
(exc. VAT)
76.54
(inc. VAT)
units
Per unit
1 - 4
€62.23
5 - 9
€59.12
10 - 39
€56.00
40 +
€52.91
Related Products
Adaption circuit board for 40-Pin-Sockets with a distance ...
Description:
Adaption circuit board for 40-Pin-Sockets with a distance of 1524 mm Epoxy fibre-glass FR4 1.50 mm Double-sided 35 μm Cu Plated through holes (PTH)Hot air leveling (HAL leadfree)Solder stop mask Hole spacing 2.54 mm2 x 20 two-hole-pads on each sideU-shape ...
Prototyping boards manufactured from epoxy glass material to ...
Description:
Prototyping boards manufactured from epoxy glass material to BS 4584 part 3 or 16 Card thickness is 1.6 mm. Copper is 305 g/m² (1 oz/ft²). Edge connector fingers are gold plated to a thickness of 1.5 microns. 1.0 mm (0.040 ...
Matrix boards with 1mm holes on a 254mm ...
Description:
Matrix boards with 1mm holes on a 254mm pitch. Single-sided boards for wiring by wrapping, with optimum flexibility and maximum density.The DIP sockets are held in place by soldering the outer pins to the corresponding square pads.Reference grid on both ...
Matrix boards with 1mm holes on a 254mm ...
Description:
Matrix boards with 1mm holes on a 254mm pitch. 35 μm CU on one sideHAL hot dip tin-plated Hole pattern: 2 x 2 mm (0.79mil)Soldering islands 1.6 mm²44 x 42 holes in rows Hole diameter: 0.8 mm Soldering side with ...