TE Connectivity Straight, Modified Polyolefin Adhesive Lined, 30mm
- RS Stock No.:
- 718-3118
- Mfr. Part No.:
- 202K132-3/42-0
- Manufacturer:
- TE Connectivity
Discontinued product
- RS Stock No.:
- 718-3118
- Mfr. Part No.:
- 202K132-3/42-0
- Manufacturer:
- TE Connectivity
Technical data sheets
- Moulded Boot Straight size 32
- Installation of /225 Coated Straight and 90° Moulded Parts using a Hot Air Gun.
- Installation of /225 Coated Straight and 90° Moulded Parts using a Hot Air Gun.
- Installation of /225 Coated Straight and 90° Moulded Parts using a Hot Air Gun.
- Installation of /225 Coated Straight and 90° Moulded Parts using a Hot Air Gun.
Legislation and Compliance
Product Details
Ready Coated General Purpose (Lipped) - 202K1 and 222K1 Series
High performance pre-coated epoxy adhesive option on the 202K straight and 222K right angled boots (-25 Fluid resistant modified elastomer).
Specifications
Attribute | Value |
|---|---|
| Type | Straight |
| Inside Diameter Primary | 30mm |
| Inside Diameter Secondary | 30mm |
| Adhesive Lined | Yes |
| Material | Modified Polyolefin |
| Number of Breakouts | 1 |
| Minimum Operating Temperature | -20°C |
| Maximum Operating Temperature | +105 °C, +60 °C |
| Shrunk Diameter Primary | 14.2mm |
| Shrunk Diameter Secondary | 5.9mm |
| Series | 202K1 |
- RS Stock No.:
- 718-3118
- Mfr. Part No.:
- 202K132-3/42-0
- Manufacturer:
- TE Connectivity
- Moulded Boot Straight size 32
- Installation of /225 Coated Straight and 90° Moulded Parts using a Hot Air Gun.
- Installation of /225 Coated Straight and 90° Moulded Parts using a Hot Air Gun.
- Installation of /225 Coated Straight and 90° Moulded Parts using a Hot Air Gun.
- Installation of /225 Coated Straight and 90° Moulded Parts using a Hot Air Gun.