Legrand Cantilever Arm Bracket Stainless Steel Cable Tray Fixing Plate, 100 mm Width, 74mm Depth

  • RS Stock No. 163-3077
  • Mfr. Part No. LCA100S
  • Manufacturer Legrand
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

Cantilever arms enable horizontal runs of cable tray to be mounted to vertical steel, concrete or masonry surfaces or to Swiftrack channel They are available in ten sizes to accommodate all tray widths Cantilever arms are of fabricated construction with a bottom flange on arms 225 mm wide and above for extra strength Supplied singly without fasteners

Specifications
Attribute Value
Accessory Type Cantilever Arm Bracket
Material Stainless Steel
Depth 74mm
Tray and Basket Type Cable Tray
Duty Type Heavy Duty, Light Duty, Medium Duty
Width 100 mm
Corrosion Protection Type Stainless Steel
Series LCA
For Use With Flat Surface Tray, Swiftrack Channel
2 In stock for delivery within 2 working days
Unit of sale: Each
18.85
(exc. VAT)
23.19
(inc. VAT)
units
Per unit
1 - 9
€18.85
10 +
€16.95
Related Products
Conduit fitting, externally threaded, multipart compression fitting with ...
Description:
Conduit fitting, externally threaded, multipart compression fitting with elastomaric seal Stainless steel body and nut and nickel plated brass insert.Can be used for knockout or threaded entries as fitting rotates until tightened. Externally threaded stainless steel fitting, nickel plated brass ...
75 mm (852-520) or 150 mm (852-536) width1mm ...
Description:
75 mm (852-520) or 150 mm (852-536) width1mm thick 316 stainless steel M6 x 12 bolts and nuts available in bags of 100
Cantilever arms are for universal mounting and used ...
Description:
Cantilever arms are for universal mounting and used to support steel wire cable trays The arms are wall mounted or use channel and EDF mounting rails. Quick and easy to use. Cantilever arms CompactUniversal mounting Wall, Channel and EDF mounts ...
The Cablofil International cable tray is a bend ...
Description:
The Cablofil International cable tray is a bend connector from the CM series It is made of 316 stainless steel material and is 300mm wide. It used in pairs on side rails for steel cable tray. Plated with ecologic zinc, ...