Ceramic Heating Element, 400mm, 200 W, 230 V ac

  • RS Stock No. 374-3075
  • Mfr. Part No. RCF 200
  • Manufacturer Acim Jouanin
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): FR
Product Details

Cold-formed heating resistors

Formable heating resistors can take on any shape after forming and may therefore be used to replace faulty specific resistors, or in a normal capacity on injection nozzles, sheaths and cylindrical parts.
The internal bend radius is 8 mm for the round sleeve and 7 mm for the square section.
The resistor must be formed to be slightly smaller than the part that will be heated, to ensure good contact.
The heating length must be determined according to the part to be heated.
A formed CFR may not be reformed.

Strip Heating Elements

Note

To obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them

Approvals

UL Recognised; CSA Certified

Warning

  • For reasons of safety the heater block and/or heater sheath must be bonded to earth
Specifications
Attribute Value
Heating Element Form Formable Coil Heaters
Power Rating 200 W
Supply Voltage 230 V ac
Length 400mm
Width 3.7mm
8 In stock for delivery within 2 working days
Unit of sale: Each
105.39
(exc. VAT)
129.63
(inc. VAT)
units
Per unit
1 - 4
€105.39
5 - 9
€102.15
10 +
€99.92
Related Products
From DBK enclosures, this range of conduction/convection PTC ...
Description:
From DBK enclosures, this range of conduction/convection PTC heating elements are 'Self regulating' and housed in a compact flat alloy construction, allowing perfect heat transmission to the thermal medium This means that no thermal cut-out or thermostat is required. These ...
Heaters specifically intended for anti-condensation and frost protection ...
Description:
Heaters specifically intended for anti-condensation and frost protection in control and equipment cabinets All types are supplied with DIN rail mounting hardware. Self regulating PTC heater Protection Class IILead wire silicone, UL 3135, white, AWG20, Length = 100±5mm Termination 6mm ...
In order to obtain optimum performance from these ...
Description:
In order to obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them 230V ac supply voltage Two M5 x 30mm mounting bolts on the rear7mm leads Suitable for medium wave ...
In order to obtain optimum performance from these ...
Description:
In order to obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them 230V ac supply voltage Two M5 x 30mm mounting bolts on the rear7mm leads Suitable for medium wave ...