3M, Grey Paste in Cartridge (600 ml), operating temperature -40 → +100 °C

  • RS Stock No. 146-3189
  • Mfr. Part No. 3M 760 grey 600ml
  • Manufacturer 3M
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): FR
Product Details

3M™ Hybrid Adhesive Sealant 760 is a single component, high strength, elastomeric sealant. This hybrid technology is paintable when wet and will not degrade when exposed to UV.

Excellent adhesion
Paintable when wet
Above/below water line use
Low VOC
30 Minute skin time

Specifications
Attribute Value
Package Size 600 ml
Product Form Paste
Package Type Cartridge
Colour Grey
Cure Time 24 (>3.5 mm) h
Minimum Operating Temperature -40°C
Maximum Operating Temperature +100°C
Specific Gravity 1.61
Odour Slight
Operating Temperature Range -40 → +100 °C
21 In stock for delivery within 2 working days
Unit of sale: Each
25.44
(exc. VAT)
31.29
(inc. VAT)
units
Per unit
1 - 14
€25.44
15 - 39
€24.44
40 +
€23.93
Related Products
Alternative to pastes, hemp and PTFE tape Seals ...
Description:
Alternative to pastes, hemp and PTFE tape Seals domestic and industrial pipe threads Suitable for use on portable water systems up to 82°CCertified to ANSI/NSF standard 61Steam compatibility 130°C @ 25psiWRC listed and meets BS6920Corgi approved for use with gas ...
A white thixotropic liquid which sets hard to ...
Description:
A white thixotropic liquid which sets hard to form a pressure tight seal Resistant to oil and unaffected by vibration Use to seal threaded and face joints that are subjected to mineral, fuel and vegetable oils, white spirit and paraffin ...
A convenient spray adhesive to aid the fixing ...
Description:
A convenient spray adhesive to aid the fixing of gaskets Adhesive/sealant will hold pre-cut gaskets in place during assembly Can be applied to all rubber, cork, paper and metal gaskets Resistant to Petrol, Diesel, Water, Grease, Oil
A single component retaining adhesive/sealant Non-metallic, non-running anaerobic ...
Description:
A single component retaining adhesive/sealant Non-metallic, non-running anaerobic paste which only cures between active metal surfaces Product hardens into a tough plastic which is resistant to solvents and lubricants Fills voids between parts to prevent fretting, wear, corrosion and backlash ...