FlexLink Beam Joint Clamp, strut profile 44 mm, 88 mm, Groove Size 11mm

  • RS Stock No. 261-2447
  • Mfr. Part No. XCFJ 75 E
  • Manufacturer FlexLink
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): SE
Product Details

Rotary Joint XC

The FlexLink Rotary Joint XC allows two XC structural beams to be attached to each other, allowing one of the beams to swing. The joint is intended for use in pairs, to avoid movement loads. The joint should be fastened into the T-slot of each beam with 2 slot nuts (RS stock-no. 248-9859) and M8x14 DIN7984 socket head screws (note: M8x14 DIN 7984 screws are not supplied and not currently available separately from RS). The maximum load for a pair of joints is 1000N.

//media.rs-online.com/t_line/L261244-01.gif
//media.rs-online.com/t_line/LF261244-10.gif
Specifications
Attribute Value
Structural Element Type Beam
Connector Type Joint
Fits Groove Size 11mm
Thread Size M6
Fits Strut Profile 44 mm, 88 mm
Product Family FlexLink
Material Aluminium
Product System XC
3 In stock for delivery within 2 working days
Unit of sale: Each
48.36
(exc. VAT)
59.48
(inc. VAT)
units
Per unit
1 - 4
€48.36
5 - 9
€46.87
10 +
€45.34
Related Products
Suitable for simple door functions, The T-slot rotatable ...
Description:
Suitable for simple door functions, The T-slot rotatable location lugs can be removed if the hinge is to be fixed to a flat surface Hole centres 50mm,Fasteners not included. Each hinge requires:. Qty 2 M6´12 socket screws see stock no. ...
Slot nuts can be inserted directly into the ...
Description:
Slot nuts can be inserted directly into the T-slot from the beam face,Features a sprung steel tab to hold the nut in position even in vertical positions,Plain square nuts (thickness 5mm) must be inserted from the beam ends.
For building connections or stays of optional length ...
Description:
For building connections or stays of optional length and angle,Will connect to all XC beam sides, or 44 mm square beam ends which accept M8 threads.,Each bracket requires two M8 x 12 screws see stock no. 527-482, and two M8T-slot ...
Use to connect beam end to beam side, ...
Description:
Use to connect beam end to beam side, consists of a threaded shaft, yoke, stop screw and T-slot nutA 12.2 mm diameter through hole needs to be drilled 22 mm from the end of the beam.,The yoke is placed in ...