FlexLink Beam Fastener Yoke, strut profile 30 mm, 60 mm, Groove Size 7.2mm

  • RS Stock No. 289-9262
  • Mfr. Part No. XFAF 30
  • Manufacturer FlexLink
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): SE
Product Details

Fastener Yokes XC and XF

Offers high vibration resistance and a neat flush finish to connect beam ends to beam side.Through hole of 12.2mm must be drilled near the beam end to accept the yoke, use drill fixture stock-no. 326-5519.,To tighten the yoke, use a ball end Allen key.,Beams may be connected end to end, requiring two yokes, two M6 x 50 caphead screws (DIN912,ISO4762) and two M6 hex nuts per joint.

//media.rs-online.com/t_line/L2489770-01.gif
//media.rs-online.com/t_line/LF248977-10.gif
Specifications
Attribute Value
Structural Element Type Beam
Connector Type Fastener Yoke
Fits Groove Size 7.2mm
Thread Size M6
Fits Strut Profile 30 mm, 60 mm
Product Family FlexLink
Product System XF
46 In stock for delivery within 2 working days
Unit of sale: Each
10.75
(exc. VAT)
13.22
(inc. VAT)
units
Per unit
1 - 4
€10.75
5 - 9
€10.42
10 +
€10.08
Related Products
Suitable for simple door functions, The T-slot rotatable ...
Description:
Suitable for simple door functions, The T-slot rotatable location lugs can be removed if the hinge is to be fixed to a flat surface Hole centres 50mm,Fasteners not included. Each hinge requires:. Qty 2 M6´12 socket screws see stock no. ...
Slot nuts can be inserted directly into the ...
Description:
Slot nuts can be inserted directly into the T-slot from the beam face,Features a sprung steel tab to hold the nut in position even in vertical positions,Plain square nuts (thickness 5mm) must be inserted from the beam ends.
Enables enclosure beam ends to be connected to ...
Description:
Enables enclosure beam ends to be connected to beam sides XD to XD, XD to XC and XF to XF,The connector is mounted directly onto the beam end with the M5 self-tapping screw.,When the connector is being fitted to the ...
For building stable and neat framework cornersThe beams ...
Description:
For building stable and neat framework cornersThe beams must be cut accurately (45° for a 90°corner, and 22.5° for a 45° corner).Corner fittings can be placed into the T-slots and clamped against the slot with the set screws provided.