Schneider Electric LC1D Series Contactor, 24 V ac Coil, 3-Pole, 25 A, 11 kW, 3NO, 690 V ac

TeSys D Contactors from Schneider Electric combine long mechanical and electrical life to offer a high reliable contactor. The range has been designed for integration in control systems and can be used to create motor starters for any type of application. The TeSys D contactors offer quick simple setup while maintaining compliance with international standards.

• Built-in auxiliary contacts for added switching capability
• Screw connections: IP20 finger-safe terminals with both North American and International terminal markings
• Can be panel mounted with screws or DIN Rail mounted
• Bidirectional peak limiting diode suppressor to protect the coil
• Easily installed accessories
• Flexible control circuit to suit a wide range of applications

Contactor utilisation categories define the current making and breaking values, based on the type of load to be controlled and the operating cycle conditions.

• AC-1: This applies to all AC devices with a power factor of at least 0.95. Example of use: resistive load, heating, distribution.


• AC-3: This applies to squirrel cage motors where breaking occurs while the motor is running. Example of use: all squirrel cage motors, lifts, escalators, conveyors, bucket elevators, compressors, pumps, mixers, air conditioning units.

• Auxiliary contact blocks with serrated wiping action
• Front mount dust tight auxiliary contact blocks
• Pneumatic time delay blocks
• Transient voltage surge suppressors
• Interface modules and electronic timers
• Mechanical latching blocks

Yes the Tesys D range uses linear translation movement that provides double breaking of the poles.

Want to delegate electrical switching tasks? Put this contactor from Schneider Electric in charge. Designed for AC-1, AC-3 and AC-4 use, it handles resistive loads and squirrel-cage motors. A maximum current rating of 40A means it works well with heavy loads, while a 4 to 22ms operating time means it has no trouble keeping up with speedy industrial processes. Built-in auxiliary contacts enable you to add a signalling function to your system. The screw terminals have multi-standard heads to give you a reliable wire connection using basic drivers. Compact dimensions of 85 (L) x 45 (W) x 92mm (D) make this unit a cinch to slot into existing motor controls.

• Protective cover and TH treatment means it's built for harsh conditions
• Mounts on rails and plates for installation flexibility
• Operates between -40°C and +60°C, meaning challenging temperatures are no problem
• Free from toxic heavy metals, mercury and PVC to boost sustainability

• Industrial automation
• Building control
• Water treatment plants
• Materials handling

This contactor has been tested in temperatures up to +850°C to ensure it's fire resistant. It's designed so that vertical burning stops within 30 seconds, to maximise flame retardancy, so you can be sure it's safe.