Pressmaster MCT Series, Crimp Die Set, Coaxial, Coaxial Type CATV, RG59, RG6

  • RS Stock No. 548-3208
  • Mfr. Part No. 4300-3138AAB
  • Manufacturer Pressmaster
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): SE
Product Details

Pressmaster (MCT) Mobile Crimp Tool Crimp Dies

A range of crimp dies for the Pressmaster MCT Mobile Crimp Tool (stock number 492-9595). These MCT crimp tool dies are available for a variety of connector types including coaxial, RJ networking, automotive and timer.

Additional Data
Stock Number Manufacturer Part No. Connector Type Wire Size/Configuration
492-9652 4300-3127/AAB Insulated and Uninsulated End Sleeve (Ferrule) 0.25-10mm2, 24-8 AWG
492-9618 4300-3128/AAB Insulated (green, yellow) 0.1-6mm2, 26-10 AWG
492-9624 4300-3129/AAB Insulated (red, blue) 0.5-2.5mm2, 22-14 AWG
492-9731 4300-3132 RJ11 6/6, 6/4
492-9719 4300-3136/AAB BNC/TNC Coaxial RG108A/U, RG142B/U, RG210/U, RG223/U, RG302/U, RG58C/U, RG59B/U, RG62A/U, RG62B/U, RG71B/U
492-9630 4300-3137/AAB Non Insulated 0.75-2.5mm2, 20-14 AWG
548-3208 4300-3138AAB CATV Coaxial 1695, RG 6, RG143A/U, RG212/U, RG222/U, RG6 Quad, RG6A/U, TWINAX
492-9646 4300-3139/AAB Non Insulated 4-10mm2, 12-8 AWG
492-9703 4300-3140/AAB BNC/TNC Coaxial RG122/U, RG174A/U, RG179B/U, RG180B/U, RG187A/U, RG188A/U, RG279/U, RG303/U, RG316/U
492-9725 4300-3144/AAB RJ45 8/8, 8/6, 8/4
492-9680 4300-3146/AAB Non Insulated Open Barrel 0.5-6mm2, 22-10 AWG
548-3214 4300-3147AAB Turned Pin 0.14-4mm2, 26-12 AWG
492-9668 4300-3150/AAB Non Insulated Open Barrel 0.1-1mm2, 26-18 AWG
492-9674 4300-3151/AAB Non Insulated Open Barrel 0.5-2.5mm2, 22-14 AWG
548-3185 4300-3153AAB Insulated and Uninsulated End Sleeve (Ferrule) 16-25mm2, 6-4 AWG
548-3191 4300-3154AAB Insulated and Uninsulated End Sleeve (Ferrule) 35-50mm2, 2-0 AWG
458-424 4300-3258/AAB Sealed splices (Blue, Blue) 0.5-2.5mm2, 22-14 AWG
458-418 4300-3262/AAB Sealed splices (Yellow) 0.1-6mm2, 26-10 AWG
458-412 4300-3403/AAB BT 2002/2003 6.81 mm, 5.18 mm, 1.46 mm
458-402 4300-3404/AAB RG213/RG214 10.9 mm, 2.54 mm, 2.03 mm, 1.73 mm
810-0741 4300-3425/AAB Timer with wire seal 0.5-1.0mm2, 1.0-2.5mm2, 2.5-4.0mm2
810-0745 4300-3426/AAB Timer without wire seal 0.5-1.0mm2, 1.0-2.5mm2, 2.5-4.0mm2
810-0754 4300-3428/AAB 1.5 System with wire seal 0.75-1.25mm2, 1.5mm2
810-0723 4300-3706/AAB Automotive with wire seal 0.5-1.5mm2, 1.5-2.5mm2, 4.0-6.0mm2
810-0732 4300-3707/AAB Automotive with wrap around crimp 0.5-1.5mm2, 1.5-2.5mm2, 4.0-6.0mm2
810-0735 4300-3708/AAB Automotive with wrap over-lap crimp 0.5-1.5mm2, 1.5-2.5mm2, 4.0-6.0mm2
683-1658 4300-3709/AAB Flag terminals 0.75-2.5 mm2, 18-14 AWG

Note

Hex size: 9.14,8.23mm

Pressmaster Crimp Tools

Specifications
Attribute Value
Crimp Connector Type Coaxial
Coaxial Type CATV, RG59, RG6
Series MCT
1 In stock for delivery within 2 working days
Unit of sale: Each
39.54
(exc. VAT)
48.63
(inc. VAT)
units
Per unit
1 - 9
€39.54
10 - 24
€36.25
25 - 49
€33.99
50 - 99
€32.46
100 +
€31.06
Related Products
A semi-–professional ratchet hand tool for crimping shielded ...
Description:
A semi-–professional ratchet hand tool for crimping shielded and unshielded modular data plugs. The parallel action tool with ratchet release mechanism enables the tool to be easily opened to remove obstructions when an improper crimp occurs. A range of interchangeable ...
A Semi-professional ratchet hand tool for crimping shield ...
Description:
A Semi-professional ratchet hand tool for crimping shield rings / ferrules of shielded Bel Stewart connectors. See part number 290-4780 typically. The ferrule die sets are easily changed to suit individual cable diameters. Die sets for 5.2 mm and 6.0 ...
Tools type PZ03 and type KEBS0560 have a ...
Description:
Tools type PZ03 and type KEBS0560 have a front entry die system and makes for easier access in confined spaces. Tools type KEB4010 has a smaller frame and is suitable for one-handed use. All tools have ratchet action with an ...
From Klauke, a professional quality battery operated crimp ...
Description:
From Klauke, a professional quality battery operated crimp tool for heavy duty uninsulated terminals within the wire range 6mm² to 95mm². The head is fully rotatable over 360°, offering versatility in awkward or confined spaces. Dies are automatically extracted after ...