DMC Ratchet Crimping Tool for Type 43 Centre Contact

  • RS Stock No. 185-6157
  • Mfr. Part No. MH800 (GB109)
  • Manufacturer DMC
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): US
Product Details

DMC MH800 Miniature Special Purpose Crimp Tool

A miniature special purpose crimp tool specifically designed to crimp the centre contact of Type 43 (T43) coaxial connectors with a wire size range of 20 to 32 AWG (miniature to sub-miniature). The MH800 crimp tool from DMC has a lightweight design and uses interchangeable positioners for precision crimping. A fixed position locator and double ratchet action ensure that consistent crimping accuracy and precision are achieved and partial crimps are prevented. The MH800 crimp tool has tight gaging tolerances and also features an indented tip configuration that allows a uniform flow of metal during the crimping operation.

Features and Benefits
• Double action ratchet
• Fixed positioner
• Crimps the centre contact of Type 43
• Tight gaging tolerances

Typical Applications:
• Maintenance & repair
• Electrical Installations
• Computer Interfacing
• Cable assemblies

FAQ:
How easy are they to use?
They are very easy to use, choose the male or female pin for application, insert the wire into the pin then open the crimp tool, insert into the hole of the indent crimper and squeeze until the cycle finishes.

How do you maintain the product?
This hand tool requires little maintenance. Please be advised that its good practice to keep the indenter tips free of debris. Do not lubricate with oil, this is a precision tool and should be treated as such.

The Importance of a High-Quality Crimp
When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.

Specifications
Attribute Value
Crimp Connector Type Type 43 Centre Contact
Crimp Tool Type Ratchet
Overall Length 190.5mm
9 In stock for delivery within 2 working days
Unit of sale: Each
741.05
(exc. VAT)
911.49
(inc. VAT)
units
Per unit
1 +
€741.05
Related Products
K 30/6 K self-setting crimping tool for cable ...
Description:
K 30/6 K self-setting crimping tool for cable end-sleeves and twin cable end-sleeves 008 - 16 mm². Characteristics One crimping profile for cross-sections from 0.08-16 mm² due to automatic cross-section adjustment With ratchet for consistently-controlled crimp results Lateral insertion (side ...
A derivative of the Daniels Manufacturing MIL tooling ...
Description:
A derivative of the Daniels Manufacturing MIL tooling range, this is an 8-indent tool for wire sizes up to 25mm², adjustable with an easy to operate selector knob. Precision ratchet control ensures consistent crimping over many operations. • Positioner (stock ...
Lightweight design and very high density, micro Comp® ...
Description:
Lightweight design and very high density, micro Comp® is an alternative to HD DSUB with superior characteristics,A flexible alternative to MIL-STD 83513 connectors Stainless steel Compatible with MIL-STD 83513 interfaces.
Suitable for UTO Series (size 16) and UTOW ...
Description:
Suitable for UTO Series (size 16) and UTOW Series (size 20) Solid machined or stamped crimp and solder pins and sockets Support crimp tool and positioner.