RS PRO, DC Motor Controller, Potentiometer Control, 10 17 V dc, 30 A, Skeleton/Boxed

  • RS Stock No. 363-9617
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

Series 2600 Reversible Motor Controller

Microprocessor powered controller for permanent magnet, shunt wound, flat style and general purpose dc. motors.

Operates from a battery or rectified smooth dc. supply
12 or 24V dc. supply voltage
15 or 30A current rated version
Forward and reverse direction control
Protected against short circuit to output and polarity misconnection

Adjustable up to 15 or 30A continuous rating, 27 or 56A peak
Settable presets for high or low speed, overcurrent, acceleration or deceleration
Fault indication via flashing LED for overcurrent, current tripped, low supply voltage, over temperature
Over current and thermal protection, progressive thermal shutdown

Specifications
Attribute Value
Supply Voltage 10 17 V dc
Current Rating 30 A
Voltage Rating 12 V
Compatible Motor Type Permanent Magnet, Shunt
Control Input Potentiometer
Mounting Style Skeleton/Boxed
Length 148mm
Width 132mm
Depth 24mm
Dimensions 148 x 132 x 24 mm
Operating Temperature Range +50 +65 °C
Temporarily out of stock - back order for despatch 06-07-2020, delivery within 2 working days
Unit of sale: Each
236.03
(exc. VAT)
290.32
(inc. VAT)
units
Per unit
1 +
€236.03
Related Products
Analog feedback5V, 10V or 4-20mA control Position accuracy ...
Description:
Analog feedback5V, 10V or 4-20mA control Position accuracy max 0,1%Solid state power stage Small size, great performance Digitally settable parameters Verstile dynamic settings Housing options available Pwm Freq, 2/16k Hz ( since prog. v1.3 )Improved accurate , parameter 17, prog. ...
This small set point isolator module accepts virtually ...
Description:
This small set point isolator module accepts virtually all standard industrial control voltages (ie. 0-5V, 0-10V, 4-20mA, 0-20mA). Also incorporated are relays to control the reversing version of the low power motor controllers. Provides intrinsically safe control voltages for mains ...
This module is a 4-quadrant, linear output driver ...
Description:
This module is a 4-quadrant, linear output driver which is suitable for driving small dc motors and gear motors up to 60 watts. Only single polarity voltage supply is required to achieve bi-directional motor speed control Employs armature feedback technique ...
The digital EC sensorless amplifier is a 1-quadrant ...
Description:
The digital EC sensorless amplifier is a 1-quadrant digital controller for the control of brushless dc EC motors up to 250W Rotor position/Hall sensors are not required- the actual rotor position is evaluated by using the Back-EMF sensing technique. Functions ...