Electromen OY, DC Motor Controller, Potentiometer Control, 12 → 24 V dc, 3 A, Panel Mount

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): FI
Product Details

EM-185 DC Motor Speed Regulator

The motor drive is a PWM-based DC-motor driver. The materials and features meet the industrial environment requirements. The device is CE marked and has been tested through EMC measurements required by industrial environment.Motor voltage is regulated against supply voltage changes, and there is also a load compensation (RxI) adjustment. Thanks to these features drive offers good performance in motor speed control applications. The current limit and the rpm range are adjustable with trimmer potentiometers. The power stage of the device is protected against short-circuit and overload (over temp.).The drive is easy to mount in a 10mm hole in an assembly panel.

Features & Benefits

1 Quadrant
Panel mountable
Small size
Motor power 5-80W
Load compensation Rxl
Adjustable current limit
EMC tested (CE marked)
Overload and short circuit protected

Specifications
Attribute Value
Supply Voltage 12 → 24 V dc
Current Rating 3 A
Voltage Rating 35 V
Control Input Potentiometer
Mounting Style Panel Mount
Length 37mm
Width 30mm
Operating Temperature Range 0 → +60 °C
2 Within 1 working day(s) (IE stock)
69 Within 2 working day(s) (EU stock)
Unit of sale: Each
106.20
(exc. VAT)
130.63
(inc. VAT)
units
Per unit
1 +
€106.20
Related Products
This range of cost effective low voltage dc ...
Description:
This range of cost effective low voltage dc motor controllers are suitable for use with permanent magnet dc. motors up to 12A. The boxed version is protected to IP22.,Comprehensive instruction sheet supplied. Adjustable maximum and minimum speedsIR compensation Adjustable overload ...
Cost-effective dc motor speed controllers suitable for use ...
Description:
Cost-effective dc motor speed controllers suitable for use with shunt and permanent dc motors, such as the Parvalux range The built-in EMC and Harmonic Filters can enable a complete drive to conform with the statutory EMC and Harmonics directives. High ...
Suitable for permanent magnet and wound field dc ...
Description:
Suitable for permanent magnet and wound field dc motors Supply 12 or 24Vdc battery or linear power supply Continuous rating 24A, maximum current limited to less than 36AAdjustable electronic current limit up to 36ASpeed control by potentiometer Soft start Heatsink ...
Linear servo control amplifier used to control motors ...
Description:
Linear servo control amplifier used to control motors up to 50WSuitable for a wide range of motors including the Maxon RE36 and A-Max 324 quadrant operation5 operating modes , (IxR, voltage regulation, digital encoder, dc tacho, current control)External DIP switch ...