Chemtronics 1.5m Desoldering Braid, Width 1.9mm

  • RS Stock No. 382-9826
  • Mfr. Part No. 7-5L
  • Manufacturer Chemtronics
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): US
Product Details

Soder-Wick® De-soldering Braid

De-soldering braid packaged in static dissipative bobbins.

Significantly reduces rework/repair time
Minimises the risk of damage to the board
Patented non-corrosive, halide free, organic no-clean flux
BGA desolder braid is designed for removing solder from BGA pads and chips

Note

Series 50 and Series 82 contain Rosin and Rosin SD

Wick & Braid

Specifications
Attribute Value
Width 1.9mm
Length 1.5m
12 Within 1 working day(s) (IE stock)
1364 Within 2 working day(s) (EU stock)
Unit of sale: Each
3.11
(exc. VAT)
3.83
(inc. VAT)
units
Per unit
1 - 9
€3.11
10 - 19
€2.99
20 - 49
€2.89
50 +
€2.64
Related Products
Finely woven pure copper braid, quickly removes excess ...
Description:
Finely woven pure copper braid, quickly removes excess material during hand soldering rework Braid is rigid to prevent unwanted flexing, absorbent and will not unravel when bit pressure is placed upon it Flux is a synthetic, non-corrosive medium which will ...
Chip Quik Alloy for SMD Removal (16ft In ...
Description:
Chip Quik Alloy for SMD Removal (16ft In 30-6.5 in. Lengths) Leaded. Easily remove SMD parts with Chip Quik® removal alloy Reduce heat and reduce damage to circuit boards and SMD parts during removal Use with SMD291 flux.
Pure copper braidsQuick desoldering.Their long length enables efficient ...
Description:
Pure copper braidsQuick desoldering.Their long length enables efficient working on cards.Available in 3 widths of braid on a 30 m reel.
These desoldering wicks are supplied in an anti-static ...
Description:
These desoldering wicks are supplied in an anti-static case and require no cleaning after desoldering thanks to their copper braiding coated with a special halide-free synthetic resinSolder is absorbed quickly, leaving only a negligible amount of residue that is non-corrosive ...