Georg Fischer ABS 10bar Diaphragm Valve, 29.514.510 1/2

  • RS Stock No. 742-2775
  • Mfr. Part No. 29.514.510 1/2
  • Manufacturer Georg Fischer
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): CH
Product Details

Type 514 ABS Diaphragm Valves

Type 514 are a new generation of ABS diaphragm valves with solvent cement sockets from GF Piping Systems, It sets new standards regarding safety, efficiency and simplicity.
Instead of the commonly used four metal screws it has a central union nut - this non-corrosive connection is characterised by homogeneous temperature behaviour, an even surface pressure and high pressure rating up to 16 bar. The optimal flow geometry offers double flow with same energy expenditure. With almost linear flow characteristics this guarantees stable processes.
Beyond that the weir of the branched valve has been moved directly to the pipe wall of the main line. Therefore dead leg was reduced to an absolute minimum and thus the hygiene was increased at the same time.
Standard equipment like a lockable handwheel, a two-coloured indicator and an interface for a self-adjusting limit switch set new standards in terms of user-friendliness.

Fields of Application:
Chemical Process Industry
Life Science
Microelectronics
Water Treatment
Food and Beverage
Measurement and Control
Applications with high viscosity and solid content

Double flow rate compared to predecessor
One housing nut replaces four screws compared to predecessor
Handwheel with built-in locking mechanism
For easy installation and removal
Short overall length

Diaphragm Valves - PVC-U and ABS

10 bar Working Pressure at 20°C.,Hand wheel controlled, EPDM Diaphragm, M6 thread mounting hole.

Specifications
Attribute Value
Attachment Type Socket
Pipe Diameter 1/2in
Body Material ABS
Connection 1/2 in Socket
Pressure Rating 10bar
Flow Factor Kv 125L/min
Maximum Operating Temperature +60°C
Minimum Operating Temperature -40°C
Operating Temperature Range -40 → +60 °C
9 In stock for delivery within 2 working days
Unit of sale: Each
107.22
(exc. VAT)
131.88
(inc. VAT)
units
Per unit
1 - 4
€107.22
5 +
€103.91
Related Products
The John Guest system of push-in fittings and ...
Description:
The John Guest system of push-in fittings and pipe, designed for use with air, provide the ideal connection from compressor receiver to air line service components through to complete ring main and take off points Time efficient, no nonsense one ...
Brass body and spindle valves to BS2051, giving ...
Description:
Brass body and spindle valves to BS2051, giving a finer control of mediums such as gases, air, oil and water For medium pressure applications The pressure ratings given are the maximum permissible for the valves and therefore reference should be ...
The Festo VZFX angle seat is a 1-1/4in ...
Description:
The Festo VZFX angle seat is a 1-1/4in G connection pneumatic operated process valve is an innovative product made of gunmetal process valve with stainless steel, brass, and aluminium actuators for operating pressure up to 40bar It is perfect for ...
The Burkert pneumatic valve with angle seat 1in ...
Description:
The Burkert pneumatic valve with angle seat 1in G connection has normally closed (NC) configuration and is made of gunmetal for maximum operating pressure of 16bar It has a 2//2-way configuration with the under-seat flow for liquids. This anti-water hammer ...